Beko Washer Dryer WDER7440421W Manual

The Beko WDER7440421W is a 7kg capacity washer dryer with 1400 RPM spin speed, A+++ energy rating, and Heat Pump drying technology. It features multiple wash programs, delay start, child lock, anti-crease, and quick wash options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash & Dry Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum light, filter access, water inlet valves, drain pump.

Feature	Description
Capacity	7kg washing, 4kg drying
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ for washing, A for drying
Heat Pump Drying	Energy-efficient drying technology
Programs	15 wash programs, 4 drying programs
Display	LED digital display with time remaining
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Quick Wash	30-minute express program
Anti-Crease	Reduces wrinkles after cycle completion

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future use.
Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust front feet to ensure stability.
Plug into grounded power outlet.

WARNING! Do not install behind lockable doors. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Remove packaging materials from drum and detergent drawer.
Connect water and power, ensure machine is level.
Run empty cotton cycle at 90°C with detergent to clean drum.
Set language: Press and hold Start/Pause + Delay Start for 3 seconds to select language.
Test programs: Run quick wash to verify operation.

CAUTION! Do not use machine without removing transit bolts—risk of damage.

Specifications

Model: WDER7440421W
Capacity: 7kg wash, 4kg dry
Dimensions (HxWxD): 85 x 60 x 60 cm
Spin Speed: 1400 RPM
Energy Consumption: 0.78 kWh per cycle (cotton, 60°C)
Water Pressure: 0.5-10 bar
Noise Level: 74 dB (washing), 69 dB (spinning)
Voltage: 220-240V, 50Hz
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Drying programs

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Delay Start, Extra Rinse, Child Lock, Display.

Programs: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Wool, Quick Wash (30 min), Drying (Cupboard Dry, Iron Dry, etc.).

Settings: Delay Start (1-24h), Spin Speed (400-1400 RPM), Temperature selection, Extra Rinse, Child Lock (press 3 sec). Display shows time remaining, cycle stage, and error codes.

Connecting Utilities

Water: Connect inlet hoses to taps (max temp 70°C). Drain: Secure hose to standpipe. Power: Use dedicated 13A socket.

Turn off water taps and power before connecting.
Use only provided hoses; do not reuse old ones.
Ensure drain hose is not kinked or submerged.
Check for leaks after first connection.

Tip: Install a drip tray if placing on wooden floors.

Using Wash & Dry Programs

Supports combined wash+dry cycles or separate operations.

Load laundry: Do not exceed max weight (7kg wash, 4kg dry).
Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
Select program: Turn knob to desired program (e.g., Cotton 40°C).
Adjust settings: Press Spin, Temp, Extra Rinse as needed.
Start: Press Start/Pause; display shows time remaining.
Drying: Select drying program after wash or combined cycle.
Unload promptly after cycle to reduce creasing.

WARNING! Do not dry rubber, foam, or waterproof items. Clean lint filter after every drying cycle.

Special Functions

Delay Start: Press button, use +/- to set hours (1-24). Child Lock: Press 3 seconds to activate/deactivate. Anti-Crease: Drum tumbles periodically after cycle ends. Quick Wash: 30-minute cycle for lightly soiled loads.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, drum, filter, and door seal.

Detergent drawer: Remove and rinse under warm water.
Drum: Run empty hot wash with vinegar or cleaner.
Filter: Turn drain pump cap counterclockwise, remove debris.
Door seal: Wipe with damp cloth to remove residue.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE compliant; meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check power socket; ensure child lock is off.
No water intake	Taps off/hose kinked	Open taps; straighten hoses; check water pressure.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Error code E01	Water inlet fault	Check hoses for blockages; reset machine.
Clothes still wet after drying	Lint filter/overload	Clean lint filter; reduce load size; select correct program.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com