Beko Washing Machine 6kg 1200rpm Manual

The Beko Washing Machine 6kg 1200rpm is a front-loading laundry appliance designed for household use, featuring a 6kg capacity, 1200 RPM spin speed, multiple wash programs, energy efficiency, child lock, delay timer, and various fabric care options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, door with safety lock, water inlet valves, drain pump filter, adjustable feet, and power cord.

Feature	Description
Capacity	6 kg (dry laundry weight)
Spin Speed	Up to 1200 RPM
Energy Rating	A+++ (or as per model)
Programs	Cotton, Synthetic, Delicate, Quick Wash, etc.
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic during operation
Display	LED showing time, cycle, and status
Noise Level	Low noise operation (dB values vary)
Dimensions	Standard front-loader size (approx.)

Installation

Unpack and inspect contents. Place on a level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Level the machine using a spirit level; tighten lock nuts.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place into standpipe or sink; secure to avoid slipping.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on: Plug in and press power button.
Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set preferences: Use settings button to adjust beep volume, etc.
Load detergent: Fill drawer compartments as per detergent type.

CAUTION! Ensure hoses are not kinked and connections are tight to prevent leaks.

Specifications

Model Type: Front-loading automatic washer.
Capacity: 6 kg.
Max Spin Speed: 1200 RPM.
Programs: 15+ including Cotton, Eco, Quick, Wool, Delicate.
Water Pressure: 0.5 - 10 bar (recommended).
Power Supply: 220-240V, 50Hz.
Dimensions (HxWxD): Approx. 85 x 60 x 55 cm.
Weight: Approx. 70 kg.
Noise (wash/spin): <60 dB / <75 dB.

Controls and Settings

Control Panel: Power button, program selector knob, start/pause, temperature, spin speed, extra options (prewash, extra rinse), delay timer, child lock button.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Quick Wash (30°C, 30 min), Eco 40-60, Wool, Hand Wash, Rinse+Spin, Spin Only, Drum Clean.

Settings: Adjust temperature (cold to 90°C), spin speed (0-1200 RPM), options (e.g., extra rinse), delay start (1-24h). Child lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual). Drain: Place hose into standpipe (max height 100 cm) or sink.

Ensure taps are off before connecting hoses.
Use only supplied hoses; replace if damaged.
Secure drain hose to avoid displacement.
Check for leaks after first connection.

Tip: Install a drip tray or leak detector for added safety.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Use drawer compartments I (prewash), II (main wash), * (softener).
Select program: Turn knob to desired program.
Adjust settings: Set temperature, spin speed, and options.
Start: Press start/pause; door locks automatically.
End of cycle: Machine beeps; door unlocks after a short delay.
Unload promptly to avoid wrinkles and odors.

WARNING! Do not open door during wash; wait for unlock indicator. Remove all objects from pockets.

Safety Features

Child Lock: Locks control panel. Door Lock: Automatically engages during operation. Overflow Protection: Stops water if detected. Imbalance Control: Reduces spin speed if load is uneven. Thermal Cut-out: Prevents overheating.

Care & Cleaning

Regular maintenance ensures longevity.

Clean detergent drawer: Remove and rinse monthly.
Clean drain pump filter: Turn off power, open filter cover at front, drain water, remove debris.
Clean door seal: Wipe rubber gasket to remove lint and residue.
Run Drum Clean program: Monthly with dedicated cleaner or 90°C cotton cycle.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

Complies with EU directives for safety (LVD) and EMC. Energy label as per EU regulations. Manufactured by Beko PLC. For support, visit www.beko.com or contact local service center. Serial number located on door rim or rear panel.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power, door, child lock	Check plug, ensure door closed, deactivate child lock.
No water intake	Taps off, kinked hose, filter clog	Open taps, straighten hose, clean inlet filter.
Water not draining	Drain hose blocked, pump filter clogged	Check hose for kinks, clean pump filter.
Excessive vibration/noise	Transit bolts not removed, uneven load, unbalanced floor	Remove transit bolts, redistribute laundry, level feet.
Error code on display	Various faults (e.g., E01, E10)	Consult manual error code list; reset by unplugging for 5 mins.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; have model and serial number ready.