The Beko WMB81431 LW is an 8kg capacity front-loading washing machine featuring AquaWave technology for efficient washing, ProSmart Inverter Motor for quiet operation, 15 wash programs including Cotton, Synthetic, Delicate, Wool, Quick Wash, and Anti-Allergy cycles, energy rating A+++, spin speed up to 1400 rpm, delay timer up to 24 hours, child lock, anti-crease function, and foam detection system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Front-loading drum, ProSmart Inverter Motor, LED display, control dial, detergent drawer, water inlet filters, drain pump filter.
| Feature | Description |
|---|---|
| Capacity | 8 kg maximum load |
| Spin Speed | Up to 1400 rpm |
| Wash Programs | 15 programs including Cotton, Eco 40-60, Quick Wash |
| Motor | ProSmart Inverter Motor (10-year warranty) |
| Energy Rating | A+++ (most efficient) |
| Delay Timer | Up to 24 hours |
| Child Lock | Prevents accidental program changes |
| Anti-Crease | Reduces wrinkles after wash |
| AquaWave Technology | Optimizes water usage and washing motion |
| Foam Detection | Prevents excess foam and ensures rinse efficiency |
Unpack and remove transit bolts. Place on level, solid floor.
WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before use.
Before first wash, run a maintenance cycle.
CAUTION! Use only HE (High Efficiency) detergent to prevent excess foam.
Control Panel: Program dial, Start/Pause button, Delay Timer button, Spin Speed button, Temperature button, Extra Rinse button, Child Lock button.
Display: Shows remaining time, selected options, and error codes.
Program Selection: Turn dial to desired program (Cotton, Synthetic, Wool, etc.). Temperature: Adjust from cold to 90°C. Spin Speed: Adjust from 400 to 1400 rpm or select Rinse Hold. Delay Timer: Set start time up to 24 hours. Child Lock: Press and hold for 3 seconds to activate/deactivate. Extra Options: Extra Rinse, Pre-wash, Anti-Crease.
Use provided hoses; ensure taps are easily accessible.
Tip: Use only new hoses; do not reuse old ones. Ensure water pressure is between 0.5 and 10 bar.
Select program based on fabric type and soil level.
WARNING! Do not open door during high-temperature washes; steam may cause burns.
Regular cleaning ensures performance and longevity.
CAUTION! Unplug before cleaning filter. Do not use solvents or scouring pads.
Energy rating A+++ reduces electricity and water consumption.
Annual energy consumption: approx. 150 kWh. Annual water consumption: approx. 10,000 liters.
CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured by Beko plc. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK). 2-year manufacturer warranty; 10-year warranty on ProSmart Inverter Motor (registration required).
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine won't start | Power/door | Check plug, power; ensure door closed properly; press Start/Pause. |
| No water intake | Taps/hoses/filters | Ensure taps on; check hoses for kinks; clean inlet filters. |
| Water doesn't drain | Drain hose/filter | Check hose for kinks/blockage; clean drain pump filter. |
| Excessive vibration/noise | Transit bolts/leveling | Ensure transit bolts removed; re-level machine; redistribute load. |
| Error codes (e.g., E01, E02) | Various faults | Consult manual error code list; unplug for 5 minutes, restart. |
| Detergent not dispensed | Drawer blocked | Clean detergent drawer compartments; use correct detergent type. |
Reset: Unplug for 5 minutes, then restart.
Service: 0333 207 9710; www.beko.com