Beko Washing Machine Instructions Manual

The Beko Washing Machine is a high-efficiency front-loading appliance designed for household use, featuring multiple wash programs, energy-saving modes, child lock, delay start, and spin speed adjustments. It incorporates advanced technologies for optimal cleaning while being gentle on fabrics. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Adjustable Feet, Power Cord.

Feature	Description
Control Panel	Digital display with program selector and function buttons
Detergent Dispenser	Compartments for pre-wash, main wash, and fabric softener
Water Inlet Valves	For hot and cold water connection
Drain Pump	For removing used water
Adjustable Feet	For leveling the machine
Child Lock	Prevents accidental program changes
Delay Start	Programs wash cycle to begin later
Spin Speed Control	Adjustable from 400 to 1400 RPM
Quick Wash	Reduced cycle time for lightly soiled loads
Energy Saving Mode	Reduces power consumption

Installation

Unpack and inspect contents. Place on a solid, level floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps; ensure washers are fitted.
Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
Level the machine: Adjust feet using a wrench; check with spirit level.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Power on machine: Press POWER button.
Select maintenance cycle: Choose Cotton program at 90°C without laundry.
Add detergent: Pour 100ml of detergent into drum, not dispenser.
Start cycle: Press START/PAUSE to begin; this cleans internal components.
Set preferences: Use SETTINGS menu to configure language, buzzer volume, etc.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Capacity: 8 kg (dry laundry).
Energy Class: A+++.
Spin Speed: Up to 1400 RPM.
Programs: Cotton, Synthetics, Delicates, Wool, Quick Wash, Sport, Anti-Allergy, etc.
Water Pressure: 0.5 - 10 bar.
Power Supply: 230V~50Hz.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Noise Level: Wash: 53 dB; Spin: 72 dB.

Controls and Settings

Access functions via rotary dial and button panel. Display shows time, temperature, spin speed, and selected options.

Buttons: POWER, START/PAUSE, OPTIONS, CHILD LOCK, DELAY START, SPIN SPEED, TEMPERATURE.

Program Selection: Turn dial to desired wash program. Options: Pre-wash, Extra Rinse, Half Load, Silent Mode. Settings Menu: Language, Buzzer Volume, Factory Reset. Defaults: Temperature 40°C, Spin 1200 RPM, Buzzer On.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot). Drain: Secure hose to standpipe (max height 1m).

Ensure taps are off before connecting hoses.
Use only supplied hoses; do not reuse old ones.
Drain hose must not be kinked or submerged.
After connection, open taps slowly and check for leaks.

Tip: Install a drip tray if placing machine on wooden floors.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load evenly, do not overload.
Add detergent: Pour into correct dispenser compartment.
Select program: Turn dial (e.g., Cotton for towels/bedding).
Adjust settings: Press TEMPERATURE or SPIN SPEED to modify.
Add options: Press OPTIONS for Pre-wash, Extra Rinse, etc.
Start: Press START/PAUSE; door locks automatically.
Pause/Stop: Press START/PAUSE to interrupt; press again to resume.
End of cycle: Buzzer sounds; door unlocks after a short delay.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Delay Start: Set wash to begin in 1-24 hours. Silent Mode: Reduces noise during night hours. Anti-Allergy: Extra rinse and higher temperature to remove allergens.

Care & Cleaning

Unplug before maintenance. Monthly: Clean detergent dispenser, door seal, and filter. Every 3 months: Run maintenance wash at 90°C without laundry.

CAUTION! Never use abrasive cleaners or solvents on surfaces. Wipe control panel with damp cloth only.

Regulatory Information

CE Marked: Complies with EU directives. Waste Electrical regulations: Dispose of at designated recycling points. Manufacturer: Beko PLC. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug socket; ensure child lock is off; close door firmly.
No water intake	Taps/hoses/filter	Open taps; check hose for kinks; clean inlet filter.
Water doesn't drain	Drain hose/pump filter	Check hose for blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling/load	Ensure transit bolts removed; re-level machine; redistribute load.
Error code on display	Various faults	Consult manual error code list; unplug for 5 minutes, then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 207 9710; www.beko.com