Beko Washing Machine Manual

The Beko washing machine is a reliable and efficient household appliance designed for various fabric types and load sizes. It features multiple wash programs, energy-saving options, child lock, delay start, and spin speed adjustments. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, door lock, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Wash Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Spin Speed	Adjustable up to 1400 RPM
Energy Class	A+++ for high efficiency
Load Capacity	Up to 9 kg (varies by model)
Delay Start	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Noise Level	Low noise operation
Display	LED digital display with time remaining
Water Inlet	Hot & cold water connections
Drain Hose	Adjustable height for proper drainage

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach hoses to hot/cold taps; ensure washers are fitted.
Connect drain hose: Place hose in standpipe or sink; secure to avoid slipping.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Select program: Choose Cotton 90°C without laundry.
Add detergent: Pour 100ml of detergent into drawer compartment II.
Start cycle: Press START/PAUSE to begin; this cleans drum and removes residues.
Set preferences: Use SETTINGS button to adjust beep volume, language, etc.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model Series: Beko Washing Machine (various models).
Capacity: 7 kg, 8 kg, 9 kg options.
Spin Speed: Up to 1400 RPM.
Energy Rating: A+++ (most efficient).
Water Pressure: Minimum 0.5 bar, maximum 10 bar.
Power Supply: 220-240V AC, 50Hz.
Dimensions (HxWxD): Approx. 85cm x 60cm x 55cm.
Programs: 15+ programs including Eco, Anti-Allergy, Steam.
Noise Level (wash/spin): 56 dB / 76 dB.
Warranty: 2 years parts and labor.

Controls and Settings

Control Panel: POWER, START/PAUSE, PROGRAM SELECTOR knob, OPTION buttons (e.g., Prewash, Extra Rinse), SPIN SPEED button, TEMPERATURE button, DELAY START button.

Display Symbols: Door locked, child lock, water tap, drain, cycle progress.

Program Selection: Turn knob to desired program (Cotton, Synthetics, Delicates, etc.). Options: Adjust spin speed (400-1400 RPM or No Spin), temperature (cold to 90°C), extra functions. Settings Menu: Press and hold SETTINGS to access language, volume, factory reset.

Connecting Water Supply

Hot and cold water inlets at rear; drain hose connection.

Ensure water taps are off before connecting hoses.
Connect blue hose to cold tap, red hose to hot tap (if available).
Use supplied washers; tighten by hand, then a quarter turn with pliers.
Place drain hose in standpipe (min. 60cm height) or over sink edge.
Secure hose with clip to prevent movement.

Tip: Check for leaks after connections; run a short test cycle.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not overload; leave space for movement.
Add detergent: Use compartment I for prewash, II for main wash, softener symbol for conditioner.
Close door firmly: Machine will not start if door is open.
Select program: Turn knob (e.g., Cotton for towels/bedding).
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press START/PAUSE; door locks and cycle begins.
Pause/change: Press START/PAUSE to pause; wait for door lock light to go off before opening.
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during high-temperature washes; steam may cause burns.

Special Functions

Delay Start: Press DELAY button to set start time (1-24 hours). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate. Extra Functions: Prewash for heavily soiled items, Extra Rinse for sensitive skin, Speed Wash for small loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum cleaning cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Copyright © Beko plc; trademarks of Arçelik A.Ş. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check power outlet; ensure child lock is off.
No water intake	Taps off/hose kinked	Open water taps; straighten hoses; check water pressure.
Water not draining	Drain hose blocked	Check hose for kinks/blockages; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Error codes (e.g., E01)	Various faults	Refer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; check warranty card.