Beko Washing Machine User Manual

The Beko Washing Machine is a high-efficiency front-loading appliance designed for household laundry needs, featuring multiple wash programs, energy-saving modes, child lock, delay start, spin speed adjustment, and self-cleaning functions. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Filter, and Door Lock.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use wrench to remove bolts from rear panel.
2. Connect water supply: Attach hoses to hot/cold water taps; ensure tight connections.
3. Connect drain hose: Place hose into standpipe or sink; secure to prevent slipping.
4. Level the machine: Adjust feet to ensure machine is stable and does not vibrate.
5. Plug into grounded electrical outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are leak-free before use.

First-Time Setup

Power on washing machine; run initial setup cycle.

1. Select language: Press SETTINGS button to choose display language.
2. Run cleaning cycle: Use Drum Clean program without laundry to remove residues.
3. Set water hardness: Adjust in settings if applicable for your area.
4. Load detergent: Fill dispenser compartments as per manual instructions.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

• Capacity: 7 kg (15.4 lbs) dry laundry.
• Energy Rating: A+++ for energy efficiency.
• Spin Speed: Up to 1400 RPM.
• Programs: Cotton, Synthetic, Delicate, Quick Wash, Wool, Sportswear, Drum Clean.
• Water Connection: Hot & cold fill.
• Power Supply: 220-240V AC, 50Hz.
• Dimensions (HxWxD): 85cm x 60cm x 55cm.
• Noise Level: 65 dB during spin.

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (Temperature, Spin Speed, Delay Start), CHILD LOCK.

Programs: Select via dial (Cotton, Synthetic, etc.). Options: Adjust temperature (cold to 90°C), spin speed (400-1400 RPM), delay start (1-24 hrs). Settings: Language, water hardness, buzzer volume, factory reset.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (red for hot, blue for cold). Drain: Place hose securely.

1. Turn off water taps before connecting hoses.
2. Use supplied hoses; do not reuse old ones.
3. Ensure drain hose is not bent or kinked.
4. Check for leaks after connections.

Tip: Install a drip tray if machine is on upper floors to prevent water damage.

Using Wash Programs

Supports various fabrics and soil levels.

1. Sort laundry: Separate by color and fabric type.
2. Load machine: Do not overload; leave space for movement.
3. Add detergent: Use correct compartment and amount.
4. Select program: Turn dial to desired program.
5. Adjust options: Set temperature, spin speed, etc.
6. Start: Press START/PAUSE; door locks automatically.
7. End of cycle: Buzzer sounds; door unlocks after a short delay.

WARNING! Do not open door during wash cycle; wait until unlocked. Remove items promptly after cycle to prevent odors.

Special Functions

Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable. Delay Start: Set delay before wash begins. Drum Clean: Run monthly without laundry to maintain hygiene.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Clean filter every 3 months.

CAUTION! Do not use abrasive cleaners on door seal or drum. Keep area around machine dry.

Regulatory Information

Complies with EU Ecodesign and Energy Labeling regulations. CE marked. Manufactured under ISO 9001 quality standards. For support, visit www.beko.com or contact customer service at 1-800-237-5365.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-237-5365; www.beko.com