beko washing machine wm5100w manual

The Beko WM5100W is a freestanding washing machine with a 5kg capacity, featuring multiple wash programs, energy-efficient operation, a digital display, delay start, child lock, and a fast wash option. It is designed for standard household use with a cold water fill connection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent drawer, drum, filter, drain hose, and adjustable feet.

Feature	Description
Capacity	5kg load capacity for standard laundry
Digital Display	Shows program time, cycle stage, and settings
Wash Programs	Multiple programs including Cotton, Synthetic, Delicate, Quick Wash
Energy Class	Energy-efficient operation to reduce power consumption
Delay Start	Set washing to begin up to 24 hours later
Child Lock	Prevents accidental program changes
Spin Speed Adjustment	Adjustable spin speed up to 1000 rpm
Fast Wash	Reduces cycle time for lightly soiled loads
Water Inlet	Cold water fill connection
Drain Hose	Adjustable length for proper drainage

Installation

Unpack and inspect contents. Place on a level, stable floor near water and drain points.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level the machine; use spirit level to check.
Connect water supply: Attach inlet hose to cold water tap; ensure tight connection.
Connect drain hose: Place hose into standpipe or sink; secure to avoid slipping.
Plug into grounded power outlet.

WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash to clean the drum.

Power on machine: Plug in and press POWER button.
Select program: Turn program selector to Cotton 90°C.
Add detergent: Place detergent in main wash compartment.
Start cycle: Press START/PAUSE; allow cycle to complete without laundry.
Set preferences: Use settings button to adjust spin speed, temperature if needed.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: Beko WM5100W
Capacity: 5kg
Energy Rating: A+++ (EU scale)
Spin Speed: Up to 1000 rpm
Programs: Cotton, Synthetic, Delicate, Quick Wash, Wool, Rinse & Spin
Water Supply: Cold fill only
Dimensions (HxWxD): 85cm x 60cm x 50cm
Power Supply: 230V~50Hz
Noise Level: Wash: 56 dB; Spin: 76 dB

Controls and Settings

Control Panel: POWER button, Program selector knob, START/PAUSE button, Delay Start button, Child Lock button, Spin Speed button, Temperature button.

Display Icons: Wash, Rinse, Spin, Child Lock, Delay Start, End of cycle.

Program Selection: Turn knob to desired program (e.g., Cotton, Synthetic). Settings: Adjust spin speed (400-1000 rpm) and temperature (cold to 90°C) using respective buttons. Delay Start: Press to set delay (1-24 hours); time shown on display. Child Lock: Press and hold for 3 seconds to activate/deactivate; locks controls during wash.

Connecting Water Supply

Cold water connection only. Ensure tap is compatible with inlet hose.

Turn off water tap before connecting.
Screw inlet hose onto tap; hand-tighten, then use pliers for quarter turn.
Connect other end to machine inlet valve; tighten securely.
Open tap fully; check for leaks at connections.
Ensure drain hose is not kinked and is secured at 60-100cm height.

Tip: Use only provided hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load items loosely; do not overload.
Add detergent: Pull drawer; add powder/liquid to correct compartment (I: pre-wash, II: main wash, *: softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetic for synthetics).
Adjust settings: Press TEMP/SPIN to modify if needed.
Start: Press START/PAUSE; display shows time remaining.
Pause: Press START/PAUSE to pause; door locks during wash.
End of cycle: Machine beeps; door unlocks after a short delay.

WARNING! Do not open door during wash; wait for drum to stop and door lock to release.

Special Functions

Delay Start: Set wash to begin later (1-24 hours). Child Lock: Prevents accidental changes. Fast Wash: Reduces cycle time for lightly soiled loads (select Quick Wash program). Extra Rinse: Adds additional rinse cycle for sensitive skin (press RINSE button).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly. Run maintenance wash every 2 months: Use drum cleaner or hot cotton cycle without laundry. Clean filter: Turn off water/power; open filter cover at front; remove and clean under running water.

CAUTION! Do not use abrasive cleaners or solvents. Keep area around machine dry.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Waste disposal: Dispose of packaging and old machine per local regulations. Manufacturer: Beko plc. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug/power; ensure child lock is off; close door properly.
No water intake	Tap/ hose/kinked hose	Ensure tap is on; check hose for kinks; clean inlet filter.
Water does not drain	Drain hose/ filter blockage	Check hose for kinks; clean pump filter; ensure height is 60-100cm.
Excessive vibration/noise	Transit bolts/ leveling/ overload	Remove transit bolts; re-level feet; redistribute load evenly.
Door will not open	Door lock/ cycle running	Wait for cycle to end and lock to release; unplug for 2 minutes to reset.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 207 9710; www.beko.com