Beko Washing Machine WTG620M2W User Manual

The Beko WTG620M2W is a 6kg capacity front-loading washing machine with 1200 RPM spin speed, featuring multiple wash programs, energy efficiency class A+++, delay timer, child lock, quick wash option, and anti-crease function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, filter, drain pump, and adjustable feet.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn adjustable feet to level machine; use spirit level.
3. Connect water supply: Attach inlet hose to cold water tap; ensure tight connection.
4. Connect drain hose: Place in standpipe or sink; secure with hook.
5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run an empty cotton cycle at 90°C to clean drum.

1. Power on machine: Press POWER button.
2. Select language: Press and hold PROGRAM button for 3 seconds to choose language.
3. Set water hardness: Consult manual for setting based on local water.
4. Load detergent: Add to appropriate dispenser compartment.
5. Close door and select program: Turn program selector knob.
6. Start wash: Press START/PAUSE button.

CAUTION! Ensure packaging materials and transit bolts are fully removed.

Specifications

• Model: WTG620M2W
• Capacity: 6kg
• Max Spin Speed: 1200 RPM
• Energy Class: A+++
• Water Consumption: Approx. 45 liters per cycle (cotton 60°C)
• Noise Level: 53 dB (washing), 73 dB (spinning)
• Programs: 15 including Cotton, Eco 40-60, Synthetic, Delicate, Wool, Quick Wash
• Special Features: Delay timer, child lock, anti-crease, extra rinse, pre-wash
• Power Supply: 220-240V, 50Hz
• Weight: 68kg

Controls and Settings

Control Panel: POWER button, program selector knob, temperature button, spin speed button, delay timer button, start/pause button, child lock button.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, etc.).

Temperature: Press TEMP button to cycle through 30°C, 40°C, 60°C, 90°C, Cold.

Spin Speed: Press SPIN button to select 400, 600, 800, 1000, 1200 RPM or Rinse Hold.

Delay Timer: Press DELAY button to set start time (1-24 hours).

Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water Supply

Cold water connection required; hot water optional for certain programs.

1. Turn off water tap before connecting.
2. Connect inlet hose to cold water tap (blue marking).
3. For hot water: Connect red-marked hose if available.
4. Ensure hoses are not kinked or twisted.
5. Check for leaks after connection.

Tip: Use only provided hoses; do not use old hoses from previous appliances.

Using Wash Programs

Select appropriate program for fabric type.

1. Sort laundry: Separate by color and fabric type.
2. Load machine: Do not exceed 6kg; distribute evenly.
3. Add detergent: Use compartment II for main wash; I for pre-wash.
4. Select program: Turn knob (e.g., Cotton for cotton items).
5. Adjust settings: Set temperature, spin speed if needed.
6. Close door: Ensure it clicks shut.
7. Start: Press START/PAUSE.
8. After wash: Remove laundry promptly; leave door ajar to dry interior.

WARNING! Do not wash items contaminated with petrol, solvents, or chemicals.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

• Drum: Run empty hot wash monthly with drum cleaner.
• Detergent dispenser: Remove and clean under running water.
• Filter: Clean pump filter every 2-3 months; locate behind lower panel.
• Door seal: Wipe clean after each use to prevent mold.
• Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug machine before cleaning any parts.

Safety Features

Child Lock: Locks control panel to prevent changes. Door Lock: Automatically locks during wash; unlocks at end. Overflow Protection: Automatically stops water if detected. Imbalance Control: Reduces spin speed if load is unbalanced.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU Regulation 2019/2014. For support, visit www.beko.com or contact local service center. 2-year manufacturer warranty.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; do not attempt repairs yourself.