beko washing machine wtik74151f manual

The Beko Washing Machine WTIK74151F is a 7kg capacity front-loading washing machine with 1400 RPM spin speed, featuring A+++ energy rating, inverter motor technology, Anti-Allergy program, Quick Wash, SteamCure, and various specialized washing programs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Washing Programs 8. Maintenance & Care 9. Child Lock & Safety 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, LED display, Program selector knob, Start/Pause button, Temperature selector, Spin speed selector, Delay Start, Child Lock, SteamCure function.

Feature	Description
Capacity	7 kg (dry laundry weight)
Spin Speed	Up to 1400 RPM
Energy Rating	A+++ (most efficient)
Motor	Inverter Direct Drive Motor
Anti-Allergy	Special program to remove allergens
Quick Wash	14-minute program for lightly soiled items
SteamCure	Steam function to reduce wrinkles and odors
Noise Level	Wash: 53 dB, Spin: 74 dB
Programs	15 programs including Cotton, Synthetic, Wool, Delicate
Display	LED with time remaining indicator

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Level the machine: Adjust front feet to ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press Power button.
Run cleaning cycle: Select "Drum Clean" program (without laundry) at 90°C.
Set preferences: Use Settings button to adjust buzzer volume, etc.
Load laundry: Do not exceed 7 kg; distribute evenly.
Select program: Turn knob to desired program.

CAUTION! Ensure transit bolts are removed before operation to prevent damage.

Specifications

Model: Beko WTIK74151F
Capacity: 7 kg
Spin Speed: 1400 RPM (adjustable)
Energy Consumption: 0.95 kWh per cycle (Cotton 60°C)
Water Consumption: 52 liters per cycle (Cotton 60°C)
Dimensions (HxWxD): 84.5 x 59.5 x 53.5 cm
Voltage/Frequency: 220-240V, 50Hz
Max Inlet Pressure: 1 MPa (10 bar)
Min Inlet Pressure: 0.05 MPa (0.5 bar)
Programs: 15 including Cotton, Eco 40-60, Synthetic, Wool, Delicates, Quick Wash, Anti-Allergy, Drum Clean

Controls and Settings

Control Panel: Power button, Program selector knob, Start/Pause, Temperature button, Spin speed button, Delay Start, Child Lock, Steam button.

Program Selection: Turn knob to select: Cotton, Synthetic, Wool, Delicates, Quick 14', Anti-Allergy, SteamCure, etc.

Temperature: Press repeatedly to select 20°C, 30°C, 40°C, 60°C, 90°C, or Cold. Spin Speed: Select 400, 600, 800, 1000, 1200, 1400 RPM or Rinse Hold. Delay Start: Set delay up to 24 hours. Child Lock: Press and hold for 3 seconds to lock/unlock controls. SteamCure: Press to activate steam function (available on select programs).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if used). Drain: Secure hose to standpipe or sink.

Ensure taps are off before connecting hoses.
Use only provided hoses; do not extend.
Drain hose must not be kinked or submerged.
After connection, open taps fully and check for leaks.

Tip: Install a drip tray if placing on wooden floors.

Using Washing Programs

Select program based on fabric type and soil level.

Load laundry: Open door, load evenly, close securely.
Add detergent: Pour into detergent drawer (main wash and pre-wash compartments).
Select program: Turn knob to desired program.
Adjust settings: Temperature, spin speed, Steam if needed.
Start: Press Start/Pause; display shows time remaining.
Pause/Modify: Press Start/Pause to pause; you can change settings before resuming.
End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during high-temperature washes; wait until lock symbol disappears.

Maintenance & Care

Clean detergent drawer monthly: Remove and rinse under water. Clean door seal: Wipe with damp cloth to remove lint/residue. Run Drum Clean monthly: Use 90°C program without laundry. Clean filter: Locate at front bottom; turn counterclockwise to remove and clear debris.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners on surfaces.

Child Lock & Safety

Child Lock: Press and hold Child Lock button for 3 seconds to lock/unlock controls (LED lights when active). Door Safety Lock: Door locks automatically during wash; unlocks at end or when cycle paused. Overload Protection: Motor stops if overload detected; redistribute laundry and restart.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label according to EU Regulation 2019/2014. Manufacturer: Beko PLC, UK. For support, visit www.beko.co.uk or contact 0333 207 9710. 2-year manufacturer's warranty.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/child lock/door	Check plug; ensure door closed; disable child lock.
No water intake	Taps/hoses/filter	Ensure taps on; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration	Transit bolts/leveling/load	Remove transit bolts; re-level machine; redistribute laundry.
Error code on display	Various faults	Refer to manual error code list (e.g., E01: Water inlet fault).

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.co.uk