beko washing machine wtk104121w manual

The Beko WTK104121W is a 10kg capacity top-loading washing machine with 1200 RPM spin speed, featuring AquaWave technology for efficient washing, AntiVibration design for quiet operation, LED display, multiple wash programs, delay start, child lock, and energy-efficient performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-loading drum, Control Panel with LED display, Water inlet valves, Drain pump, Adjustable feet, Detergent drawer.

Feature	Description
Capacity	10 kg (22 lbs) maximum load
Spin Speed	1200 RPM maximum
AquaWave Technology	Optimizes water motion for better cleaning
AntiVibration Design	Reduces noise and movement during spin
LED Display	Shows time, cycle stage, and settings
Wash Programs	15 programs including Cotton, Synthetic, Quick, Delicate
Delay Start	Program start delay up to 24 hours
Child Lock	Locks control panel during operation
Energy Class	A+++ for energy efficiency
Water Protection	Leak protection system

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water inlet: Attach hoses to cold water tap (blue mark) and hot if applicable (red mark).
Connect drain hose: Place in standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Power on machine; run initial test cycle.

Check connections: Ensure water taps are on and hoses secure.
Select test cycle: Choose "Cotton 60°C" without laundry.
Add detergent: Pour 100ml detergent into main wash compartment.
Start cycle: Press Start/Pause; let complete to flush system.
Set preferences: Adjust spin speed, temperature defaults if needed.

CAUTION! First cycle may contain residual water from factory testing.

Specifications

Model: WTK104121W
Capacity: 10 kg
Spin Speed: 1200 RPM
Dimensions (HxWxD): 85 x 60 x 60 cm
Water Pressure: 0.5 - 10 bar
Programs: 15 including Eco 40-60, Wool, Hand Wash, Sport
Energy Consumption: 0.95 kWh per cycle (Eco 40-60)
Water Consumption: 52 liters per cycle (Eco 40-60)
Noise Level: 53 dB (washing), 73 dB (spinning)
Power Supply: 220-240V, 50Hz

Controls and Settings

Control Panel: Program selector knob, LED display, Temperature button, Spin speed button, Delay Start button, Start/Pause button, Option buttons.

Program Selection: Turn knob to desired program (Cotton, Synthetic, etc.).

Temperature: Press TEMP to cycle through 30°C, 40°C, 60°C, Cold. Spin Speed: Press SPIN to select 400, 600, 800, 1000, 1200 RPM or Rinse Hold. Delay Start: Press DELAY to set 1-24 hours. Options: Extra Rinse, Pre-wash, Quick+ (reduces time). Child Lock: Press and hold Temp + Spin for 3 seconds to enable/disable.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 100 cm).

Ensure taps are off before connecting hoses.
Use only supplied hoses; replace if damaged.
Secure drain hose to prevent slipping.
Check for leaks after first connection.

Tip: Install drain hose at 60-100 cm height for proper drainage.

Using Wash Programs

Supports various fabrics and soil levels.

Load laundry: Do not exceed 10 kg; distribute evenly.
Add detergent: Use drawer compartments (I=pre-wash, II=main wash, *=softener).
Select program: Turn knob (e.g., Cotton for cottons, Synthetic for blends).
Adjust settings: Set temperature, spin speed, options as needed.
Start: Press Start/Pause; LED shows remaining time.
Pause/change: Press Start/Pause to pause; can change settings before restarting.
End of cycle: Signal sounds; door unlocks after spin stops.

WARNING! Do not open door during spin cycle. Wait for drum to stop completely.

Special Functions

Delay Start: Set 1-24 hours delay. Child Lock: Locks controls during operation. Quick+: Reduces cycle time by 20-50%. Extra Rinse: Adds rinse for sensitive skin. Pre-wash: For heavily soiled items.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run drum cleaning cycle every 30 washes (select "Drum Clean" program).

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine not starting	Power/child lock	Check plug; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Open taps; check hose kinks; clean inlet filter.
Water not draining	Drain hose/pump filter	Check hose height/blockage; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; re-level machine.
Door not opening	Water in drum	Wait for drain to complete; select Rinse Hold cancel.
Error codes (E01-E10)	System faults	Refer to manual error code list; reset by unplugging 5 min.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service; www.beko.com