beko washing machine wtk84011w manual

The Beko WTK84011W is a freestanding washing machine with an 8kg capacity, featuring A+++ energy efficiency, 1400 RPM spin speed, AquaWave technology for gentle washing, Anti-Allergy program, Quick Wash, Delay Timer, and Child Lock. It includes various wash programs for different fabric types, automatic load detection, and imbalance control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control panel with rotary program selector, LED display, detergent drawer, drum, filter, and adjustable feet.

Installation

Unpack and remove transit bolts. Place on level floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Adjust feet: Turn adjustable feet to level machine; use spirit level.
3. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
4. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Check installation: Ensure machine is level, hoses secure.
2. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
3. Set preferences: Use program selector and options buttons to set default spin speed, temperature.
4. Understand display: LED shows time remaining, cycle stage, and error codes.

CAUTION! Use only recommended detergents; do not exceed maximum load capacity.

Specifications

• Model: Beko WTK84011W
• Capacity: 8kg
• Energy Class: A+++
• Spin Speed: 1400 RPM
• Water Pressure: 0.5 - 10 bar
• Programs: Cotton, Synthetic, Delicate, Wool, Anti-Allergy, Quick Wash, etc.
• Dimensions (HxWxD): 85cm x 60cm x 60cm (approx)
• Power Supply: 220-240V, 50Hz
• Noise Level: Wash: 56 dB, Spin: 76 dB

Controls and Settings

Control Panel: Rotary program selector, Start/Pause button, option buttons (Speed, Temp, Delay), LED display.

Programs: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Wool (cold-40°C), Anti-Allergy (60°C), Quick Wash (14 min), Spin Only, Rinse & Spin.

Options: Adjust spin speed (400-1400 RPM, Rinse Hold, No Spin), temperature (cold to 90°C), Delay Timer (1-24 hours). Child Lock: Press and hold Speed + Temp for 3 seconds. Display: Shows time remaining, selected options, error codes.

Connecting Water Supply

Use provided inlet hoses; connect to cold water tap (or hot if available).

1. Turn off tap; connect hose to tap (hand-tighten).
2. Connect other end to machine inlet valves (marked I and II).
3. Open tap fully; check for leaks.
4. Place drain hose in standpipe (min 60cm height) or sink; do not submerge.

Tip: Use only new hoses; replace every 5 years. Do not kink hoses.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Do not exceed 8kg; distribute evenly.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
3. Select program: Turn selector to desired program (e.g., Cotton).
4. Set options: Adjust temperature, spin speed, delay if needed.
5. Start: Press Start/Pause; machine will lock door and begin.
6. Pause/change: Press Start/Pause to pause; wait for door lock light off to add items.
7. End of cycle: Machine beeps; door unlocks after short delay.

WARNING! Do not open door during spin; wait for drum to stop.

Special Features

Anti-Allergy: Uses higher temperature and extra rinse to remove allergens. AquaWave: Gentle drum motion reduces wear. Quick Wash: 14-minute cycle for 2kg lightly soiled cottons. Delay Timer: Set wash to finish at desired time. Child Lock: Disables controls when activated.

Care & Cleaning

Regular maintenance ensures performance.

1. Clean detergent drawer: Remove and rinse monthly.
2. Clean filter: Locate at front bottom; turn counterclockwise to remove; clear debris.
3. Clean drum: Run empty Cotton 90°C cycle monthly or use drum cleaner.
4. Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use harsh chemicals.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Manufactured by Beko plc. For support, visit www.beko.com or contact local service center. Serial number located on door rim or rear panel.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service; have model and serial number ready.