beko washing machine wtl82051w manual

The Beko WTL82051W is a freestanding top-loading washing machine with a capacity of 8kg, featuring multiple wash programs, energy-efficient operation, delay start, child lock, and a transparent lid. It is designed for household use with a 120V AC power supply. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Wash drum, Control panel, Water inlet valves, Drain hose, Adjustable feet, Lid with safety lock.

Installation

Unpack and inspect contents. Place on level, stable floor.

1. Remove transit bolts: Use wrench to remove bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
3. Position drain hose: Place in standpipe or sink; secure to prevent slipping.
4. Level the machine: Adjust feet using spanner; ensure machine does not rock.
5. Plug into grounded power outlet.

WARNING! Machine is heavy; use two people for lifting. Ensure transit bolts are removed before operation.

First-Time Setup

Before first wash, run an empty cycle to clean drum.

1. Connect power and water supply.
2. Select "Cotton" program without laundry.
3. Add a small amount of detergent to dispenser.
4. Start cycle; let complete to remove any residues.
5. Set child lock or other preferences via control panel.

CAUTION! Do not overload machine. Sort laundry by color and fabric type.

Specifications

• Model: Beko WTL82051W
• Type: Top-loading, freestanding
• Capacity: 8kg
• Programs: Cotton, Synthetic, Delicate, Quick Wash, Wool, Rinse+Spin, Spin Only
• Spin Speeds: Up to 1200 rpm (adjustable)
• Water Supply: Cold fill (or hot/cold if connected)
• Power Supply: 120V AC, 60Hz
• Dimensions (HxWxD): Approx. 90cm x 60cm x 55cm
• Weight: Approx. 55kg

Controls and Settings

Control Panel: Program selector, Start/Pause, Delay Start, Child Lock, Spin Speed, Water Level.

Programs: Select based on fabric: COTTON (heavy soil), SYNTHETIC (mixed fabrics), DELICATE (gentle wash), QUICK WASH (30 min), WOOL (hand wash cycle), RINSE+SPIN, SPIN ONLY.

Settings: Adjust spin speed (0-1200 rpm), water level (Low/Medium/High/Auto), delay start (1-24 hours). Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water Supply

Use provided hoses; ensure taps are off before connecting.

1. Connect inlet hoses to machine (marked hot/cold if applicable).
2. Attach other ends to water taps; hand-tighten, then use pliers for quarter turn.
3. Open taps fully; check for leaks.
4. Place drain hose in standpipe (min. 60cm height) or over sink edge; secure.

Tip: Use only new hoses; replace every 5 years. Do not kink hoses.

Using Wash Programs

Follow load guidelines; do not exceed 8kg.

1. Sort laundry: Separate whites, colors, delicates.
2. Load machine: Distribute evenly; do not pack tightly.
3. Add detergent: Use dispenser; follow dosage instructions.
4. Select program: Turn selector to desired program.
5. Adjust settings: Set spin speed, water level if needed.
6. Start: Press Start/Pause; lid locks automatically.
7. After cycle: Remove laundry promptly; leave lid open to dry drum.

WARNING! Do not open lid during wash/spin; wait until drum stops.

Special Functions

Delay Start: Set timer (1-24 hours) to start later. Child Lock: Prevents program changes. Extra Rinse: Adds rinse cycle for sensitive skin. Pre-wash: For heavily soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly. Run empty hot wash cycle every 2 months to clean drum. Check and clean pump filter if draining issues occur.

CAUTION! Do not use abrasive cleaners or solvents. Keep area around machine dry.

Regulatory Information

Complies with relevant safety standards (UL, CSA). Energy Guide label indicates estimated yearly energy consumption. Copyright © Beko. For support, visit www.beko.com or contact 1-877-232-5636.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-877-232-5636; www.beko.com