Beko WM 74155 LW Manual

The Beko WM 74155 LW is a 7kg capacity front-loading washing machine with 1400 RPM spin speed, featuring A+++ energy rating, ProSmart Inverter Motor technology, Anti-Allergy program, Quick Wash, SteamCure, and Delay Timer functions. It includes various wash programs for different fabric types, child lock, self-cleaning pump filter, and leak protection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, ProSmart Inverter Motor, Electronic Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump Filter.

FeatureDescription
Capacity7kg laundry load
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
ProSmart Inverter MotorQuiet operation with 10-year warranty
Anti-Allergy ProgramEliminates 99.9% of allergens
SteamCure FunctionReduces wrinkles and odors
Quick Wash14-minute program for small loads
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Leak ProtectionAnti-flood system with safe drain

Installation

Unpack and remove transit bolts. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust feet to ensure machine is stable.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on machine: Press Power button.
  2. Run cleaning cycle: Select Drum Clean program without laundry.
  3. Set language: If applicable, use Settings button to select language.
  4. Load detergent: Fill drawer compartments as per instructions.
  5. Select program: Choose appropriate wash for fabric type.

CAUTION! Ensure all packaging materials are removed. Check hose connections for leaks.

Specifications

Controls and Settings

Control Panel: Power button, Program selector, Start/Pause, Delay Timer, Extra Rinse, Speed/Spin reduction, SteamCure, Child Lock.

Programs: Cotton (20°C-95°C), Synthetic, Delicate, Wool, Hand Wash, Quick Wash (14 min), Anti-Allergy, Drum Clean, Sport, Outdoor, Mix, Jeans, Baby Care, Shirts, Rinse+Spin.

Settings: Temperature selection (cold to 95°C), Spin speed (0-1400 RPM), Delay timer (1-24 hours), Extra Rinse, Pre-wash, SteamCure function. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water Supply

Hot and cold water inlet connections. Use supplied hoses.

  1. Turn off water taps before connecting.
  2. Connect blue hose to cold water tap, red to hot (if available).
  3. Secure connections with supplied washers; do not overtighten.
  4. Check for leaks by turning on taps briefly before use.

Tip: If only cold water available, connect both hoses to cold tap.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (softener).
  3. Select program: Turn selector to desired program.
  4. Adjust settings: Modify temperature, spin speed, extra options.
  5. Start: Press Start/Pause button.
  6. Pause/change: Press Start/Pause to pause; turn selector to change program.
  7. End of cycle: Machine beeps; remove laundry promptly.

WARNING! Do not open door during wash; wait until lock symbol disappears.

Special Functions

Anti-Allergy: Heats water to 60°C+ to eliminate allergens. SteamCure: Reduces wrinkles using steam after wash. Quick Wash: 14-minute cycle for lightly soiled items. Delay Timer: Set start time up to 24 hours ahead. Child Lock: Prevents program changes during operation.

Care & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean detergent drawer: Remove monthly; wash with warm water.
  2. Clean pump filter: Turn off machine; open filter cover at front; remove debris.
  3. Run Drum Clean: Monthly using empty drum and special cleaner.
  4. Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Do not use high-pressure water.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Labeling requirements. ProSmart Inverter Motor covered by 10-year warranty (registration required). For support, visit www.beko.com or contact local service center. Disposal: Follow WEEE regulations; do not dispose with household waste.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lock/doorCheck power; ensure plug inserted; deactivate child lock; close door properly.
No water intakeTaps/hoses/filterEnsure taps are on; check hoses for kinks; clean inlet filters.
Water not drainingDrain hose/pump filterCheck drain hose height (max 100cm); clean pump filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet for level.
Error codes (E01-E10)Various faultsConsult manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset electronic system.

Service: Contact authorized Beko service center; keep model number ready.

Beko WM 74155 LW Manual © - All Rights Reserved 2025