beko wm62125w washing machine manual

The Beko WM62125W is a 6kg capacity freestanding washing machine with 1200 RPM spin speed, featuring A+++ energy rating, multiple wash programs, delay timer, child lock, and anti-crease function. It includes advanced features like AquaWave technology for efficient washing, Fast+ option for quicker cycles, and automatic load detection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6kg drum, electronic control panel, detergent drawer, water inlet valves, drain pump, adjustable feet, and power cord.

Feature	Description
Capacity	6kg (dry laundry weight)
Spin Speed	1200 RPM maximum
Energy Rating	A+++ (most efficient)
Programs	15 programs including Cotton, Synthetics, Delicates, Wool, Quick Wash
AquaWave Technology	Wave-like drum motion for better wash and less damage
Fast+ Option	Reduces program time by up to 30%
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Anti-Crease	Reduces wrinkles at end of cycle
Noise Level	Wash: 59 dB, Spin: 77 dB

Installation

Unpack and inspect contents. Place on stable, level floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine inlets.
Connect drain hose: Place in standpipe or sink edge; secure with U-bend.
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press Power button.
Select maintenance cycle: Turn program dial to "Cotton 90°C" without laundry.
Add detergent: Pour 100ml of detergent into drawer compartment II.
Start cycle: Press Start/Pause. This cleans drum and removes residues.
Set preferences: Use Settings button to adjust beep volume, etc.

CAUTION! Ensure all packaging and transit bolts are removed. Check for water leaks after first connection.

Specifications

Model: Beko WM62125W
Capacity: 6 kg
Spin Speed: 1200 RPM
Energy Class: A+++
Water Consumption: Approx. 52 litres per cycle (Cotton 60°C)
Dimensions (HxWxD): 84 x 60 x 55 cm
Weight: 61 kg
Voltage: 220-240V, 50Hz
Max Power: 2100 W
Programs: 15 including Eco 40-60, Sport, Baby Care, Anti-Allergy

Controls and Settings

Control Panel: Power button, Program dial, Temperature button, Spin speed button, Start/Pause, Delay button, Options (Fast+, Extra Rinse, Prewash).

Program Dial: Select from Cotton, Synthetics, Delicates, Wool, Hand Wash, Quick Wash, Daily, Eco 40-60, Sport, Baby Care, Anti-Allergy, Drum Clean, Rinse+Spin, Spin Only, Drain.

Temperature: 20°C to 90°C in steps. Spin Speed: 400 to 1200 RPM, plus Rinse Hold and No Spin. Options: Fast+ (shorter time), Extra Rinse (adds rinse), Prewash (for heavily soiled). Settings Menu: Press and hold Settings button to adjust end-of-cycle beep volume (Off, Low, High). Child Lock: Press and hold Delay and Temperature buttons for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Two hoses (blue for cold, red for hot) with filter screens. Drain: Hose with U-bend.

Turn off taps and unplug machine before connections.
Connect hoses: Screw onto taps and machine inlets; hand-tighten only.
Check filters: Ensure inlet filters are clean.
Position drain hose: Height between 60-100 cm from floor; secure to avoid slipping.
Open taps fully after connections.

Tip: Use new hoses; do not reuse old ones. Ensure no kinks in hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 6 kg; distribute evenly.
Add detergent: Use compartment I for prewash, II for main wash, softener symbol for conditioner.
Select program: Turn dial (e.g., Cotton for cottons).
Adjust options: Set temperature, spin speed, Fast+, etc.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to pause; turn dial to change program (only before start).
End of cycle: Machine beeps; door locks until safe (light goes off).

WARNING! Do not open door during wash/spin; wait for door lock light to turn off. Remove items promptly to avoid creasing.

Special Functions

Delay Timer: Press Delay button to set start time (1-24 hours). Child Lock: Locks controls when active. Anti-Crease: Reduces wrinkles by tumbling periodically after cycle. Drum Clean: Program for monthly maintenance (use without laundry).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Drum Clean program monthly.

CAUTION! Do not use abrasive cleaners or solvents. Clean filter and pump periodically to prevent blockages.

Regulatory Information

CE compliant; meets EU energy labeling and ecodesign requirements. Waste electrical products must not be disposed of with household waste; recycle according to local regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug, power; ensure door closed properly; press Start/Pause.
No water intake	Taps/hoses/filter	Ensure taps open; check hoses for kinks; clean inlet filters.
Water does not drain	Drain hose/filter	Check hose height/blockage; clean pump filter.
Excessive vibration/noise	Transit bolts/level/load	Ensure transit bolts removed; level machine; redistribute load.
Door locked after cycle	Safety lock	Wait for door lock light to turn off (may take 2 minutes).
Error codes (e.g., E01)	Various faults	Refer to manual error code list; unplug for 5 minutes, retry.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com