Beko WMB71442S User Manual

The Beko WMB71442S is a 7kg capacity front-loading washing machine with 1400 RPM spin speed, featuring A+++ energy rating, ProSmart Inverter Motor, Anti-Allergy+ program, Quick Wash, SteamCure, Delay Timer, Child Lock, and various fabric-specific washing programs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Washing Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump Filter, ProSmart Inverter Motor.

FeatureDescription
Capacity7kg laundry load
Spin SpeedUp to 1400 RPM
Energy RatingA+++ (most efficient)
MotorProSmart Inverter Motor (10-year warranty)
Anti-Allergy+Special program to remove allergens
SteamCureSteam function to reduce wrinkles and odors
Quick Wash14-minute program for lightly soiled items
Delay TimerUp to 24 hours delay start
Child LockPrevents accidental program changes
Noise LevelLow noise operation (approx. 72 dB)

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (blue=cold, red=hot).
  3. Connect drain hose: Place in standpipe or sink (max height 100cm).
  4. Level the machine: Adjust front feet; use spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first wash, run a maintenance cycle.

  1. Power on machine: Press POWER button.
  2. Select maintenance cycle: Turn program dial to "Drum Clean" or run a 90°C cotton cycle without laundry.
  3. Add detergent: Pour 100ml of liquid detergent into drawer compartment II.
  4. Start cycle: Press START/PAUSE.
  5. Set preferences: Use SETTINGS button to adjust buzzer volume, etc.

CAUTION! Remove all packaging materials and transit bolts before use.

Specifications

Controls and Settings

Control Panel: POWER button, Program Dial, Temperature button, Spin Speed button, Start/Pause button, Settings button, Delay Timer button.

Program Dial Positions: Cottons, Synthetics, Delicates, Wool, Hand Wash, Anti-Allergy+, Drum Clean, Quick Wash, Sports, Outdoor, Daily, Eco 40-60, Rinse+Spin, Spin Only, Drain.

Adjustable Settings: Temperature (Cold to 90°C), Spin Speed (400 to 1400 RPM, Rinse Hold, No Spin), Delay Timer (1-24 hours), Child Lock (press and hold Settings + Spin Speed for 3 seconds).

Connecting Water & Drain

Water Inlet: Two hoses (hot/cold) with filter screens. Drain: Flexible hose with U-shaped hook.

  1. Turn off water taps before connecting hoses.
  2. Connect blue hose to cold tap, red to hot (if available).
  3. Secure drain hose in standpipe (max 100cm height) or over sink edge.
  4. Check for leaks by turning on taps briefly before first wash.

Tip: Use only genuine Beko hoses; replace every 5 years.

Using Washing Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use compartment I for pre-wash, II for main wash, ❀ for softener.
  3. Select program: Turn dial to desired program.
  4. Adjust settings: Press Temperature or Spin Speed buttons if needed.
  5. Start: Press START/PAUSE; display shows remaining time.
  6. Add forgotten items: Press START/PAUSE to pause (if door unlocks within 2 minutes).
  7. End of cycle: Buzzer sounds; remove laundry promptly.

WARNING! Do not wash waterproof items (e.g., raincoats) as they may cause imbalance.

Special Functions

Anti-Allergy+: Uses higher temperature and extra rinses to remove allergens. SteamCure: Adds steam at end of cycle to reduce wrinkles. Quick Wash: 14-minute cycle for 2kg lightly soiled cottons. Delay Timer: Delays start up to 24 hours. Child Lock: Locks controls when activated.

Care & Cleaning

Monthly maintenance recommended.

  1. Clean detergent drawer: Pull out, rinse under tap.
  2. Clean drain pump filter: Turn off machine; open filter cover at front bottom; place towel; drain water; remove debris.
  3. Clean door seal: Wipe with damp cloth; remove small objects.
  4. Run Drum Clean program monthly: Use dedicated cleaner or 90°C cotton cycle without laundry.

CAUTION! Unplug machine before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant; meets EU Ecodesign and Energy Label regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact Beko customer service in your country.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lock/doorCheck plug; ensure door closed properly; disable child lock.
No water intakeTaps/hoses/filterEnsure taps are on; check hoses for kinks; clean inlet filters.
Water doesn't drainDrain hose/pump filterCheck drain hose height (max 100cm); clean pump filter.
Excessive vibrationTransit bolts/leveling/loadRemove transit bolts; re-level machine; redistribute laundry.
Error codes (e.g., E01)Various faultsConsult manual error code list; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.

Beko WMB71442S User Manual © - All Rights Reserved 2025