beko wmb71442w washing machine manual

The Beko WMB71442W is a 7kg capacity freestanding washing machine with 1400 RPM spin speed, featuring Anti-Crease, Cottons, Synthetics, Delicates, Wool, Hand Wash, Quick Wash, and Daily Express programs. It includes features like Delay Start, Child Lock, Load Detection, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Washing Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7kg drum capacity, Digital display, Program selector knob, Start/Pause button, Delay Start button, Child Lock button, Spin speed adjustment, Temperature selection.

Feature	Description
Capacity	7kg (dry laundry weight)
Spin Speed	Up to 1400 RPM
Energy Class	A+++ (Energy Label)
Programs	14 programs including Cottons, Synthetics, Delicates
Display	Digital display with time remaining
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Load Detection	Automatically adjusts water consumption
Anti-Crease	Reduces wrinkles at end of cycle
Quick Wash	14-minute program for lightly soiled items

Installation

Unpack and remove all transit bolts. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hose to cold water tap (3/4" thread).
Connect drain hose: Place in standpipe or sink (max height 100cm).
Level the machine: Adjust feet to ensure machine is stable.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before first use.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Plug in and press power button.
Run empty wash: Select Cottons 90°C program without laundry.
Set preferences: Use program knob and buttons to adjust default settings.
Load laundry: Do not exceed 7kg maximum load.
Add detergent: Use drawer compartments (I, II, *).

CAUTION! Ensure all packaging materials are removed. Check hose connections for leaks.

Specifications

Model: Beko WMB71442W
Capacity: 7kg
Spin Speed: 1400 RPM
Dimensions (HxWxD): 85cm x 60cm x 54cm
Water Pressure: 0.5 - 10 bar
Power Supply: 220-240V, 50Hz
Energy Consumption: 0.80 kWh per cycle (Cottons 60°C)
Noise Level: 53 dB (washing), 74 dB (spinning)
Programs: 14 including Eco 40-60, Wool, Hand Wash
Weight: 68kg

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Delay Start button, Child Lock button, Spin speed button, Temperature button.

Display Icons: Time remaining, Child Lock, Delay Start, Spin Speed, Temperature, Door Lock.

Program Selection: Turn knob to desired program (Cottons, Synthetics, Delicates, Wool, etc.). Temperature: Select 20°C to 90°C. Spin Speed: Select 400 to 1400 RPM or Rinse Hold. Delay Start: Set 1-24 hours delay. Child Lock: Press and hold for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold water only. Drain: To standpipe or sink.

Turn off water supply before connecting hoses.
Connect inlet hose to cold water tap (do not overtighten).
Secure drain hose in standpipe (max 100cm height).
Check for leaks after first connection.

Tip: Use hose clips provided. Do not kink or bend hoses sharply.

Using Washing Programs

Select appropriate program for fabric type.

Load laundry: Open door, load items loosely.
Add detergent: Use compartment I for pre-wash, II for main wash, * for softener.
Select program: Turn knob to desired program.
Adjust settings: Temperature, spin speed if needed.
Start: Press Start/Pause button.
Pause/Stop: Press Start/Pause to pause; hold for 3 seconds to cancel.
End of cycle: Door unlocks; remove laundry promptly.

WARNING! Do not open door during wash cycle. Wait for door lock light to go off.

Special Functions

Delay Start: Set wash to begin later (1-24 hours). Child Lock: Prevents accidental changes. Extra Rinse: Adds additional rinse cycle. Anti-Crease: Tumbles periodically after cycle ends. Load Detection: Automatically adjusts water level.

Care & Cleaning

Monthly maintenance: Clean detergent drawer, door seal, and filter.

Clean drawer: Remove and rinse under warm water.
Clean door seal: Wipe with damp cloth; remove debris.
Clean filter: Turn off machine; open filter cover; drain water; clean filter.
Run maintenance wash: Empty 90°C cotton cycle monthly.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Energy Label: A+++. Waste Electrical regulations apply. For disposal, contact local authorities. Manufacturer: Beko plc. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/Door	Check plug is in; ensure door is closed properly; press Start.
No water intake	Taps/Hose	Ensure water tap is on; check hose for kinks; clean filter.
Water doesn't drain	Drain hose	Check drain hose is not blocked or kinked; clean pump filter.
Excessive vibration	Transit bolts/Leveling	Ensure transit bolts removed; adjust feet to level machine.
Error codes (E01-E10)	Various faults	Consult manual error code list; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: 0333 207 9710; www.beko.com