Beko WMB71642W Washing Machine Manual

The Beko WMB71642W is a 7kg capacity front-loading washing machine with 1200 RPM spin speed, featuring energy efficiency class A+++, multiple wash programs, delay timer, child lock, and anti-crease function. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, electronic control panel, detergent dispenser, filter, adjustable feet, power cord, water inlet hoses, drain hose.

FeatureDescription
Capacity7kg (dry laundry weight)
Spin Speed1200 RPM maximum
Energy ClassA+++ (most efficient)
Programs15+ programs including Cotton, Synthetic, Delicate, Quick Wash
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-CreaseReduces wrinkles after wash
Noise LevelLow noise operation (wash: 53 dB, spin: 75 dB)
DisplayLED digital display with time remaining
Dimensions (HxWxD)84 x 59.5 x 53.5 cm

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Adjust feet: Turn to level machine; use spirit level to check.
  3. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
  4. Connect drain hose: Place in standpipe or sink (minimum height 60cm).
  5. Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Plug in machine; follow initial steps.

  1. Run empty wash: Select Cotton 90°C program without laundry to clean drum.
  2. Set language: Press and hold Start/Pause + Spin buttons for 3 seconds to cycle languages.
  3. Load detergent: Add to appropriate dispenser compartments (I: pre-wash, II: main wash, *: softener).
  4. Select program: Turn program selector knob to desired setting.

CAUTION! Ensure machine is level to prevent vibration and noise.

Specifications

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Option buttons (Delay, Spin Speed, Temperature, Extra Rinse), LED display.

Program Selection: Turn knob to desired program (icons indicate fabric type).

Options: Press relevant button to adjust: - Temperature: 20°C to 90°C (Cold option available) - Spin Speed: 400 to 1200 RPM (Rinse Hold/No Spin available) - Delay: 1 to 24 hours - Extra Rinse: Adds additional rinse cycle

Child Lock: Press and hold Delay + Spin Speed for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue: cold, red: hot if used). Drain: Secure hose to standpipe or sink edge.

  1. Ensure taps are off before connecting hoses.
  2. Use only supplied hoses; do not extend or repair.
  3. Drain hose must not be submerged in water.
  4. Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 7kg; distribute evenly.
  2. Add detergent: Use compartment II for main wash; I for pre-wash if needed.
  3. Select program: Turn knob (e.g., Cotton for towels/bed linen).
  4. Adjust options: Set temperature, spin speed, delay if required.
  5. Start: Press Start/Pause; display shows time remaining.
  6. Pause/Add: Press Start/Pause to stop; door locks during wash. Wait 2 minutes after program ends to unlock.
  7. End of cycle: Signal sounds; remove laundry promptly to reduce creasing.

WARNING! Do not wash waterproof items (raincoats, shower curtains).

Special Functions

Delay Timer: Set 1-24 hours delay start. Child Lock: Locks control panel. Anti-Crease: Drum rotates periodically after wash for up to 2 hours. Extra Rinse: Adds rinse for sensitive skin or heavy detergent.

Care & Cleaning

Monthly maintenance:

  1. Clean detergent drawer: Remove and rinse under tap.
  2. Clean filter: Turn off machine; open flap at bottom front; place towel; unscrew filter cap slowly to drain water; clean filter; replace.
  3. Clean drum: Run Cotton 90°C program empty with drum cleaner or 1 cup of vinegar.
  4. Wipe door seal: Remove debris; dry after use.

CAUTION! Unplug before cleaning filter. Do not use abrasive cleaners.

Regulatory Information

CE compliant. Meets EU Ecodesign and Energy Labelling regulations. Waste electrical products must not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact 0333 207 9710 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/child lock/doorCheck plug; ensure door closed properly; deactivate child lock.
No water intakeTaps/hoses/filterEnsure taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/filterCheck hose for kinks/blockage; clean pump filter.
Excessive vibrationTransit bolts/leveling/loadEnsure transit bolts removed; re-level feet; redistribute laundry.
Error codes (e.g., E01)Various faultsConsult manual error code list; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronics.

Service: 0333 207 9710; www.beko.com

Beko WMB71642W Washing Machine Manual © - All Rights Reserved 2025