Beko WMI 71641 Manual

The Beko WMI 71641 is a 7kg capacity front-loading washing machine with 1400 RPM spin speed, featuring Anti-Crease, Cottons, Synthetics, Delicates, Wool, Hand Wash, Quick Wash, and Allergy Care programs. It includes Delay Timer, Child Lock, Load Detection, and Energy Label A+++. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Drawer, Door Lock, Filter, Water Inlet Valves, Drain Pump.

Feature	Description
Capacity	7 kg (dry laundry weight)
Spin Speed	Up to 1400 RPM
Energy Class	A+++ (most efficient)
Programs	Anti-Crease, Cottons, Synthetics, Delicates, Wool, Hand Wash, Quick Wash, Allergy Care
Delay Timer	Up to 24 hours
Child Lock	Prevents accidental program changes
Load Detection	Automatically adjusts water and energy usage
Door Lock	Safety lock during operation
Detergent Drawer	Compartments for pre-wash, main wash, softener
Display	LED indicators for time, program, and status

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine inlets.
3. Connect drain hose: Place in standpipe or sink; ensure no kinks.
4. Plug into grounded power outlet.

WARNING! Machine is heavy; lift with care or use two people. Ensure transit bolts are removed before use.

First-Time Setup

Plug in machine; follow initial setup steps.

1. Run empty wash: Select Cottons 90°C program without laundry to clean drum.
2. Set preferences: Use PROGRAM knob and OPTIONS buttons to adjust default settings.
3. Load laundry: Do not exceed 7 kg; distribute evenly.
4. Add detergent: Use drawer compartments as per detergent instructions.

CAUTION! Ensure machine is level; adjust feet if necessary to prevent vibration.

Specifications

• Capacity: 7 kg.
• Spin Speed: 1400 RPM (adjustable).
• Programs: Anti-Crease, Cottons (20°C-90°C), Synthetics, Delicates, Wool, Hand Wash, Quick Wash (30 min), Allergy Care.
• Dimensions (HxWxD): 85 x 60 x 55 cm (approx).
• Water Pressure: 0.5 - 10 bar.
• Power Supply: 230V~50Hz.
• Energy Consumption: 0.80 kWh per cycle (Cottons 60°C).
• Noise Level: Wash: 56 dB; Spin: 76 dB.

Controls and Settings

Control Panel: PROGRAM knob, START/PAUSE button, OPTIONS buttons (Delay, Speed, Temp, Extra Rinse), Display.

Program Knob: Select washing program. Options: Adjust spin speed, temperature, delay timer, extra rinse. Display: Shows time remaining, program stage, and selected options.

Settings: Temperature (Cold to 90°C), Spin Speed (0 to 1400 RPM), Delay Timer (1-24h), Child Lock (press and hold for 3 sec), Load Detection (automatic).

Connecting Water & Drain

Water Inlet: Connect hoses to taps and machine (blue for cold, red for hot if applicable). Drain: Place hose in standpipe (max height 100 cm) or sink.

1. Turn off taps before connecting hoses.
2. Use only supplied hoses; do not overtighten.
3. Ensure drain hose is secure and not submerged.

Tip: Check for leaks after first connection; run short program to test.

Using Washing Programs

Supports various fabrics and soil levels.

1. Select program: Turn knob to desired program (e.g., Cottons for cotton items).
2. Adjust options: Press OPTIONS to set temperature, spin speed, delay if needed.
3. Add detergent: Pull drawer, add to correct compartment (I: pre-wash, II: main wash, *: softener).
4. Start: Close door, press START/PAUSE.
5. Pause/change: Press START/PAUSE to pause; door locks during operation.
6. End of cycle: Signal sounds; door unlocks after a short time.

WARNING! Do not open door during wash or spin; wait for unlock signal.

Special Functions

Delay Timer: Set 1-24 hours delay start. Child Lock: Press and hold for 3 seconds to lock controls. Extra Rinse: Adds rinse cycle for sensitive skin. Load Detection: Automatically adjusts water and time based on load weight.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean program every 30 cycles.

CAUTION! Do not use abrasive cleaners; keep filter area clear of lint.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label A+++. Copyright © Beko plc. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/door	Check plug; ensure door closed properly; press START/PAUSE.
No water intake	Taps/hoses	Ensure taps on; check hoses for kinks; clean inlet filter.
Water does not drain	Drain hose/filter	Check hose for kinks; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Error codes on display	Various faults	Refer to manual error code list; unplug for 5 min, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com.