beko wtb1041r4a 10 kg manual

The Beko WTB1041R4A is a 10 kg capacity top-loading washing machine featuring AquaWave technology for efficient washing, multiple wash programs, energy-saving modes, child lock, delay timer, and a user-friendly control panel. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10 kg drum, AquaWave technology, LED display, Control panel, Water inlet valves, Drain hose, Adjustable feet.

Feature	Description
AquaWave Technology	Provides efficient water distribution for better cleaning
10 kg Capacity	Suitable for large family loads
Multiple Programs	Cotton, Synthetic, Quick Wash, Delicate, etc.
Energy Saving	A+++ energy rating for reduced consumption
Child Lock	Prevents accidental program changes
Delay Timer	Delays start up to 24 hours
LED Display	Shows remaining time and selected program
Adjustable Feet	For stable installation on uneven floors
Quick Wash	14-minute program for lightly soiled items
Spin Speed Adjustment	Up to 1400 rpm for efficient drying

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use spanner to remove all bolts from rear panel.
Connect water supply: Attach inlet hoses to hot/cold water taps (if applicable).
Connect drain hose: Place hose into standpipe or sink, secure with hook if provided.
Adjust feet: Turn feet to level the machine; ensure it does not rock.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

Connect power and water supply.
Open detergent drawer and add washing machine cleaner or 1/2 cup of bleach.
Select Cotton program at 90°C without any laundry inside.
Start the cycle to clean the drum and remove any residues.
After completion, the machine is ready for normal use.

CAUTION! Always use the correct detergent type (powder or liquid) as specified for your model.

Specifications

Capacity: 10 kg.
Energy Rating: A+++.
Spin Speed: Up to 1400 rpm.
Programs: 15 programs including Cotton, Synthetic, Delicate, Wool, Quick Wash.
Water Supply: Cold water fill (or hot/cold if model supports).
Dimensions (HxWxD): Approximately 85 x 60 x 60 cm.
Power Source: 220-240V, 50Hz.
Noise Level: Washing: 56 dB, Spinning: 76 dB.

Controls and Settings

Control Panel: POWER button, Program selector knob, Start/Pause button, Delay timer button, Spin speed button, Child lock button.

Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, etc.). LED display shows default time and settings.

Adjustable Settings: Spin speed (400-1400 rpm), Temperature (Cold to 90°C), Delay timer (1-24 hours). Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate.

Connecting Water Supply

Cold water fill standard; some models support hot/cold.

Ensure water taps are off before connecting hoses.
Screw inlet hoses onto taps; use rubber seals provided.
Connect other ends to machine inlet valves (marked for cold/hot).
Open taps fully and check for leaks.
Place drain hose securely into standpipe (max height 100 cm).

Tip: Use only the hoses supplied with the machine; do not reuse old hoses.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 10 kg; distribute evenly.
Add detergent: Pour into main wash compartment of drawer.
Select program: Turn knob to desired setting.
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press Start/Pause button; display shows remaining time.
Pause/Change: Press Start/Pause to pause; to change, turn knob to new program and restart.
End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not wash items contaminated with flammable substances. Remove coins and objects from pockets.

Safety Features

Child Lock: Prevents accidental program changes. Door Lock: Automatically locks during wash; unlocks at end of cycle. Overflow Protection: Automatically stops water if overfill detected. Imbalance Control: Reduces spin speed if load is uneven.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean detergent drawer: Remove monthly, rinse under warm water.
Clean drum: Run maintenance wash every 2 months (90°C Cotton program without laundry).
Clean filter: Locate at front bottom, place towel, open slowly to drain residual water, remove debris.
Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug machine before cleaning. Do not use steam or high-pressure cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Manufactured under ISO 9001 quality standards. For support, visit www.beko.com or contact local service center. Copyright © Beko plc. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check plug and power; ensure child lock is off; close door properly.
No water intake	Taps/hoses/filter	Ensure taps are open; check hoses for kinks; clean inlet filter.
Water leakage	Loose connections	Tighten hose connections; check drain hose is secured.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Poor washing results	Detergent/loading	Use correct detergent amount; do not overload; select proper program.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com.