beko wtb1041r4a 10kg manual

The Beko WTB1041R4A is a 10kg capacity top-loading washing machine featuring AquaWave technology for efficient washing, multiple wash programs, delay timer, child lock, and energy-saving functions. It is designed for household use with a robust build and user-friendly interface. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 10kg drum capacity, AquaWave pulsator, electronic control panel, transparent lid, adjustable feet, inlet hoses, drain hose.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future use.
2. Adjust feet: Level the machine using adjustable feet to prevent vibration.
3. Connect water supply: Attach inlet hoses to taps; ensure washers are fitted.
4. Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

1. Power on machine: Press POWER button.
2. Select program: Turn program selector to "Cotton" at highest temperature.
3. Add detergent: Pour 100ml of detergent into drum (no laundry).
4. Start cycle: Press START/PAUSE to begin; let cycle complete.
5. Set language: If applicable, use settings menu to select language.

CAUTION! Ensure transit bolts are removed before operation to avoid damage.

Specifications

• Model: WTB1041R4A
• Capacity: 10kg
• Energy Class: A+++
• Water Consumption: Approx. 52 liters per cycle (cotton program)
• Spin Speed: Up to 1400 RPM
• Programs: Cotton, Synthetic, Delicate, Quick Wash, Wool, Rinse+Spin, Spin Only
• Dimensions (HxWxD): 90cm x 60cm x 55cm
• Power Supply: 220-240V, 50Hz
• Noise Level: Wash: 56 dB, Spin: 76 dB
• Weight: 62kg

Controls and Settings

Control Panel: POWER button, Program selector knob, Temperature button, Spin speed button, Delay button, Start/Pause button, LED display.

Program Selection: Turn knob to desired program (Cotton, Synthetic, etc.). Temperature: Press TEMP to cycle through options (Cold, 30°C, 40°C, 60°C, 90°C). Spin Speed: Press SPIN to select speed (No Spin, 400, 800, 1200, 1400 RPM). Delay Start: Press DELAY to set start time (1-24 hours). Child Lock: Press and hold TEMP + SPIN for 3 seconds to activate/deactivate.

Connecting Water Supply

Cold water connection standard; hot water optional.

1. Ensure taps are off before connecting hoses.
2. Connect blue-marked hose to cold tap; red-marked to hot tap (if used).
3. Hand-tighten connections; do not overtighten.
4. Open taps fully and check for leaks.
5. Ensure drain hose is secured to prevent slipping.

Tip: Use mesh filters on taps to prevent debris entering hoses.

Using Wash Programs

Select program based on fabric type and soil level.

1. Load laundry: Open lid, load items evenly; do not overload.
2. Add detergent: Pour into detergent drawer (compartment II).
3. Select program: Turn knob to desired program.
4. Adjust settings: Set temperature, spin speed, delay if needed.
5. Start: Press START/PAUSE; lid locks automatically.
6. End of cycle: Machine beeps; unlock lid after a few seconds.
7. Remove laundry promptly to avoid wrinkles.

WARNING! Do not open lid during wash/spin for safety. Unplug before maintenance.

Safety Features

Child Lock: Locks control panel. Lid Lock: Automatically locks during wash/spin. Overflow Protection: Automatically stops water if overfill detected. Unbalanced Load Detection: Reduces spin speed or stops if load is uneven.

Care & Cleaning

Regular maintenance ensures optimal performance.

1. Clean detergent drawer: Remove and rinse under warm water.
2. Clean drum: Run "Cotton" program at 90°C monthly without laundry.
3. Wipe exterior: Use damp cloth; do not use abrasive cleaners.
4. Check hoses: Inspect for cracks or leaks annually.
5. Clean filter: Locate pump filter at front bottom; turn counterclockwise to remove and clear debris.

CAUTION! Unplug machine before cleaning. Do not use steam or high-pressure cleaners.

Regulatory Information

Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Manufactured by Beko PLC. For support, visit www.beko.com or contact local service center. Serial number located on rating plate inside door rim.

Troubleshooting

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center; do not attempt repairs yourself.