beko wtb941r4w 9kg manual

The Beko WTB941R4W is a 9kg capacity washing machine featuring advanced washing technology, energy efficiency, multiple wash programs, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 9kg drum capacity, LED display, Program selector knob, Delay start, Child lock, Quick wash option.

Feature	Description
Capacity	9kg washing capacity for large loads
Energy Rating	A+++ energy efficiency class
Spin Speed	Up to 1400 RPM for efficient drying
Programs	15 wash programs including Cotton, Synthetic, Delicate
Quick Wash	30-minute program for lightly soiled items
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
LED Display	Shows remaining time and program status
Noise Level	Low noise operation during wash and spin
Dimensions	85cm H x 60cm W x 60cm D

Installation

Unpack and inspect contents. Place on level, stable floor.

1. Remove transit bolts: Use spanner to remove all transit bolts from rear.
2. Connect water supply: Attach inlet hoses to hot and cold water taps (if applicable).
3. Connect drain hose: Place drain hose into standpipe or sink.
4. Level the machine: Adjust feet to ensure machine is perfectly level.
5. Plug into AC power.

WARNING! Do not install in areas with freezing temperatures. Ensure all connections are secure before first use.

First-Time Setup

Before first wash, run a maintenance cycle.

1. Remove packaging: Ensure all transit bolts and packaging materials are removed.
2. Connect utilities: Verify water and drain connections are secure.
3. Run empty cycle: Select Cotton program at 90°C without laundry.
4. Set preferences: Adjust default settings via control panel if needed.
5. Load laundry: Do not exceed maximum 9kg capacity.

CAUTION! Ensure machine is level to prevent vibration during spin cycle.

Specifications

• Model: WTB941R4W
• Capacity: 9kg
• Energy Class: A+++
• Spin Speed: 1400 RPM
• Water Pressure: 0.5-10 bar
• Programs: 15 including Cotton, Synthetic, Wool, Delicate, Quick Wash
• Dimensions: 85 x 60 x 60 cm (HxWxD)
• Weight: 72kg
• Power Supply: 220-240V, 50Hz
• Noise Level: Wash: 56dB, Spin: 76dB

Controls and Settings

Control Panel: Program selector knob, Start/Pause button, Delay start button, Child lock button, LED display.

Program Selection: Turn knob to select desired wash program. LED display shows program duration.

Options: Delay Start (1-24 hours), Child Lock (press 3 seconds to activate), Spin Speed Reduction, Extra Rinse, Pre-wash.

Default Settings: Temperature, spin speed, and other parameters are preset for each program but can be adjusted.

Connecting Water Supply

Cold water connection required. Optional hot water connection available.

1. Turn off water taps before connecting hoses.
2. Connect blue-marked hose to cold water tap.
3. Connect red-marked hose to hot water tap (if using hot water supply).
4. Ensure hose filters are clean and connections are tight.
5. Check for leaks by turning on water taps briefly.

Tip: Use only new hoses provided with machine. Do not reuse old hoses.

Using Wash Programs

Select appropriate program for fabric type and soil level.

1. Load laundry: Open door, load items evenly around drum.
2. Add detergent: Use drawer compartments I (pre-wash), II (main wash), * (fabric softener).
3. Select program: Turn knob to desired program.
4. Adjust options: Press buttons for extra rinse, reduced spin, etc.
5. Start: Press Start/Pause button.
6. Delay start: Press Delay button to set start time (1-24 hours).
7. Child lock: Press and hold for 3 seconds to activate/deactivate.
8. End of cycle: Machine beeps and door unlocks (if child lock not active).

WARNING! Do not open door during wash cycle. Wait until door lock symbol disappears.

Maintenance Features

Self-cleaning program: Run every 2 months to clean drum and internal components. Drum clean light indicates when maintenance is needed.

Filter cleaning: Access filter at front bottom right. Turn counterclockwise to remove and clean.

Detergent drawer: Remove monthly for cleaning under running water.

Care & Cleaning

Unplug before cleaning exterior. Wipe with damp cloth only; do not use abrasive cleaners.

Clean detergent drawer monthly. Clean door seal regularly to prevent mold.

Run maintenance program every 2 months: Select Drum Clean program or Cotton 90°C without laundry.

CAUTION! Do not use steam or high-pressure cleaners. Keep control panel dry.

Regulatory Information

CE marked. Complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. For support, visit www.beko.com or contact local service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed, power issue	Ensure door is properly closed; check power outlet; press Start/Pause.
No water intake	Taps closed, hose kinked	Open water taps; check hose for kinks; clean inlet filters.
Water leakage	Loose connections	Check hose connections; ensure drain hose is properly placed.
Excessive vibration	Transit bolts not removed, uneven load	Remove all transit bolts; redistribute laundry evenly.
Door won't open	Cycle running, child lock active	Wait for cycle to end; check if child lock is activated.
Poor washing results	Wrong program, overload	Select appropriate program; reduce load size; use correct detergent.
Error codes on display	Various faults	Consult error code list in manual; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.