Beko WTG841B2W 8kg Washing Machine Manual

The Beko WTG841B2W is an 8kg capacity front-loading washing machine featuring multiple wash programs, energy efficiency (A+++), spin speed up to 1400 rpm, delay timer, child lock, quick wash option, anti-crease function, and load detection system. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, control panel with digital display, detergent drawer, water inlet valves, drain pump, adjustable feet, and power cord.

FeatureDescription
Capacity8kg (dry laundry weight)
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 rpm
ProgramsCotton, Synthetics, Delicates, Quick Wash, Wool, etc.
Delay TimerUp to 24 hours
Child LockPrevents accidental program changes
Anti-CreaseReduces wrinkles after wash
Load DetectionAutomatically adjusts water and energy
DisplayDigital with time remaining indicator
Door LockAutomatic safety lock during operation

Installation

Unpack and inspect contents. Place on stable, level floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level to check.
  3. Connect water supply: Attach inlet hoses to cold water tap (and hot if applicable).
  4. Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Power on machine; follow initial setup steps.

  1. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  2. Set language: If applicable, use settings button to select language.
  3. Test functions: Run a quick cycle to ensure water inlet and drain work properly.
  4. Detergent drawer: Familiarize with compartments (pre-wash, main wash, softener).

CAUTION! Ensure machine is level to prevent excessive vibration during spin.

Specifications

Controls and Settings

Access programs via rotary selector and function buttons. Display shows time, temperature, spin speed, and options.

Control Panel: POWER, Program selector, Start/Pause, Temperature, Spin Speed, Delay Start, Extra Rinse, Pre-wash, Child Lock.

Programs: Cotton (40°C-90°C), Synthetics (30°C-60°C), Delicates (cold-40°C), Quick Wash (30°C, 28 min), Wool, Silk, Anti-Allergy. Settings: Temperature selection (cold to 90°C), Spin speed (400-1400 rpm or no spin), Delay timer (1-24 hours). Options: Extra rinse, pre-wash, anti-crease, child lock (press and hold for 3 seconds).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual inlet). Drain: Place hose securely.

  1. Turn off taps before connecting hoses.
  2. Use only supplied hoses; do not reuse old ones.
  3. Ensure drain hose is not kinked and is at correct height (60-100 cm from floor).
  4. Check for leaks after first connection.

Tip: Install a drip tray if machine is on wooden floor or above living space.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Sort laundry: Separate by color and fabric type.
  2. Load machine: Do not exceed 8kg; distribute evenly.
  3. Add detergent: Use drawer compartments as directed.
  4. Select program: Turn selector to desired program.
  5. Adjust settings: Set temperature, spin speed, and options.
  6. Start: Press Start/Pause; door locks automatically.
  7. Pause/change: Press Start/Pause to pause; wait for door unlock symbol.
  8. End of cycle: Signal sounds; door unlocks after a short time.

WARNING! Do not open door during high-temperature washes; hot water may cause burns.

Special Functions

Delay Start: Set wash to begin later (1-24 hours). Child Lock: Prevents program changes during operation. Quick Wash: For lightly soiled loads (28 minutes). Anti-Crease: Tumbles periodically after wash to reduce wrinkles. Extra Rinse: Adds rinse cycle for sensitive skin.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean door seal and glass regularly to remove lint and residue. Run drum cleaning program every 30 cycles (use manufacturer's cleaner or 90°C cotton cycle without laundry).

CAUTION! Do not use abrasive cleaners or solvents on surfaces.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU regulations. Manufactured by Beko plc. For support, visit www.beko.com or contact local service center. Serial number located on door frame or rear panel.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower, door, child lockCheck plug; ensure door closed properly; disable child lock.
No water intakeTaps, hoses, filterOpen taps; check hose for kinks; clean inlet filter.
Water doesn't drainDrain hose, pump filterCheck hose position; clean pump filter.
Excessive vibrationTransit bolts, leveling, loadEnsure bolts removed; re-level machine; redistribute laundry.
Error codes on displayVarious faultsConsult manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset electronic control.

Service: Contact authorized Beko service; have model and serial number ready.

Beko WTG841B2W 8kg Washing Machine Manual © - All Rights Reserved 2025