Beko WTK104121W User Manual

The Beko WTK104121W is a 10 kg capacity top-loading washing machine with 1200 RPM spin speed, featuring AquaWave technology for efficient washing, LED display, multiple wash programs, delay start, child lock, and energy efficiency class A. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10 kg drum capacity, LED control panel, AquaWave technology, multiple wash programs, child lock, delay timer, and energy-efficient motor.

Feature	Description
Capacity	10 kg (dry laundry weight)
Spin Speed	Up to 1200 RPM
AquaWave Technology	Optimizes water flow for better cleaning
LED Display	Shows time, program, and settings
Wash Programs	Cotton, Synthetic, Delicate, Quick Wash, etc.
Delay Start	Program start delay up to 24 hours
Child Lock	Prevents accidental program changes
Energy Class	A-rated for energy efficiency
Water Inlet	Cold water connection (hot water optional)
Dimensions (HxWxD)	90 x 60 x 55 cm

Installation

Unpack and inspect contents. Place on a level, stable floor.

Remove transit bolts: Use spanner to remove bolts at the rear; keep for future use.
Connect water supply: Attach inlet hose to cold water tap; ensure tight connection.
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Level the machine: Adjust feet to ensure machine is stable and does not vibrate.
Plug into grounded power outlet.

WARNING! Do not install near heat sources or in areas with risk of freezing. Ensure water connections are leak-free.

First-Time Setup

Plug in power; follow initial setup steps.

Run a test cycle: Select Cotton program at 90°C without laundry to clean drum.
Set language: If applicable, select language via control panel.
Adjust spin speed: Use SPIN button to set default spin speed as desired.
Enable child lock: Press and hold CHILD LOCK for 3 seconds if needed.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: WTK104121W
Capacity: 10 kg
Spin Speed: 1200 RPM
Energy Rating: A
Water Pressure: 0.5 - 10 bar
Programs: Cotton, Synthetic, Delicate, Quick Wash (30°C), Wool, Sport, Rinse+Spin, Spin Only
Dimensions: 90 cm (H) x 60 cm (W) x 55 cm (D)
Power Supply: 220-240V, 50Hz
Noise Level: Washing: 56 dB; Spinning: 76 dB
Weight: 68 kg

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, SPIN SPEED, TEMPERATURE, DELAY START, CHILD LOCK, START/PAUSE.

Programs: Cotton (40°C, 60°C, 90°C), Synthetic (30°C, 40°C), Delicate (30°C), Quick Wash (30°C), Wool, Sport, Rinse+Spin, Spin Only.

Settings: Spin speed adjustable (400-1200 RPM, Rinse Hold). Temperature selection (Cold, 30°C, 40°C, 60°C, 90°C). Delay start (1-24 hours). Child lock enabled by holding button for 3 seconds.

Connecting Water Supply

Cold water inlet: Connect hose to tap. Hot water (optional): Connect to hot water tap if available.

Turn off water tap before connecting hose.
Attach inlet hose to machine (marked blue for cold).
Connect other end to water tap; ensure washer is used.
Open tap fully and check for leaks.

Tip: Use only provided hoses; do not extend or replace with non-genuine parts.

Using Wash Programs

Supports various fabric types and soil levels.

Load laundry: Open lid, load items evenly; do not overload.
Add detergent: Pour into detergent drawer (main wash and pre-wash compartments).
Select program: Turn PROGRAM SELECTOR to desired cycle.
Adjust settings: Set temperature, spin speed, and delay start if needed.
Start: Press START/PAUSE; machine will begin cycle.
Pause: Press START/PAUSE to pause; press again to resume.
End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not open lid during spin cycle. Ensure items are suitable for machine wash.

Special Functions

Delay Start: Set delay up to 24 hours for programmed start. Child Lock: Prevents changes during operation. Rinse Hold: Holds water after final rinse for easy hand washing items. Extra Rinse: Adds an additional rinse cycle for sensitive skin.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/lid	Check plug; ensure lid is closed properly; press START/PAUSE.
No water intake	Tap/hose	Ensure tap is open; check hose for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet for level.
Water leakage	Hose connections	Tighten hose connections; check drain hose placement.
Poor washing results	Detergent/overload	Use correct detergent amount; reduce load size; select proper program.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com