The Beko WTK72011W is a 7 kg capacity washing machine featuring a 1200 RPM spin speed, A+++ energy rating, Anti-Allergy program, Quick Wash, Time Delay, Child Lock, and various fabric-specific cycles. It includes a digital display, rotary program selector, and is designed for freestanding installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: 7 kg drum, Digital Display, Program Selector Knob, Start/Pause button, Option buttons (e.g., Prewash, Extra Rinse), Door with safety lock, Water inlet valves, Drain pump filter.
| Feature | Description |
|---|---|
| Capacity | 7 kg (dry laundry weight) |
| Spin Speed | Up to 1200 RPM |
| Energy Rating | A+++ (most efficient) |
| Anti-Allergy Program | Eliminates allergens with high-temperature wash |
| Quick Wash | Fast cycle for lightly soiled items (approx. 30 min) |
| Time Delay | Delay start up to 24 hours |
| Child Lock | Locks controls to prevent accidental changes |
| Digital Display | Shows time remaining, cycle stage, and settings |
| Program Selector | Rotary knob for selecting washing programs |
| Door Lock | Safety lock during operation; unlocks at cycle end |
Unpack and inspect contents. Place on level, solid floor.
WARNING! Do not install in areas prone to freezing or direct sunlight. Ensure transit bolts are removed before use.
Before first wash, run a maintenance cycle.
CAUTION! Ensure packaging materials and transit bolts are fully removed.
Control Panel: Power button, Program Selector Knob, Start/Pause, Option buttons (e.g., Prewash, Extra Rinse, Time Delay), Child Lock, Spin Speed adjustment, Temperature adjustment.
Display Icons: Shows selected program, time remaining, spin speed, temperature, door lock status, and active options.
Program Selection: Turn knob to desired program (Cotton, Synthetic, Delicate, Quick Wash 30', Anti-Allergy, etc.). Options: Press relevant button to toggle Prewash, Extra Rinse, etc. Temperature: Adjust with Temp button (Cold to 90°C). Spin Speed: Adjust with Spin button (RPM or No Spin). Time Delay: Set delay start (1-24 hours). Child Lock: Press and hold Child Lock button for 3 seconds to enable/disable.
Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual inlet). Drain: Place hose into standpipe (max height 100 cm) or sink.
Tip: Use hose clips if provided. Do not kink hoses.
Supports various fabrics and soil levels.
WARNING! Do not open door during high-temperature washes; hot water/steam risk.
Anti-Allergy: Uses high temperature to eliminate allergens. Quick Wash: Fast cycle for lightly soiled items. Time Delay: Delay start for off-peak energy times. Child Lock: Locks control panel. Drum Clean: Program to clean drum; run monthly.
Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly; remove and rinse under tap. Clean drain pump filter every 2-3 months to remove debris. Leave door ajar after use to dry drum.
CAUTION! Do not use abrasive cleaners or solvents. Empty filter only when machine is off and cool.
CE marked; complies with EU directives. Energy label according to EU regulations. Waste electrical products should not be disposed of with household waste. Please recycle according to local regulations. For support, visit www.beko.com or contact local service centre.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Machine does not start | Power/child lock/door | Check plug/power; ensure Child Lock is off; close door firmly. |
| No water intake | Taps/hoses/filter | Ensure taps are on; check hoses for kinks; clean inlet filter. |
| Water does not drain | Drain hose/filter | Check hose for kinks/blockage; clean drain pump filter. |
| Excessive vibration/noise | Transit bolts/level/load | Ensure transit bolts removed; relevel machine; redistribute load. |
| Leaking water | Hoses/detergent drawer | Tighten hose connections; ensure drawer is properly inserted; do not overfill detergent. |
| Display shows error code | Various faults | Consult manual error code list; unplug for 5 minutes then retry. |
Reset: Unplug for 5 minutes, then restart.
Service: Contact authorised Beko service agent.