beko wtk72041w washing machine manual

The Beko WTK72041W is a 7kg capacity top-loading washing machine with 1200 RPM spin speed, featuring AquaWave technology for efficient washing, multiple wash programs, delay timer, child lock, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-loading drum, Control Panel, Water Inlet Valves, Drain Pump, Adjustable Feet, Power Cord.

Feature	Description
Capacity	7kg laundry load
Spin Speed	1200 RPM maximum
AquaWave Technology	Enhanced washing motion for better cleaning
Programs	Multiple wash programs (Cotton, Synthetic, Quick, Delicate, etc.)
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Energy Rating	A+++ energy efficiency class
Water Inlet	Cold water connection (hot water optional)
Display	LED digital display with time remaining
Imbalance Control	Automatically redistributes load during spin

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn adjustable feet to level machine; use spirit level.
Connect water supply: Attach inlet hose to cold water tap; ensure tight connection.
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure water connections are leak-free before use.

First-Time Setup

Plug in machine; follow initial setup steps.

Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
Set water hardness: In settings menu, adjust according to local water hardness.
Child lock: Enable if needed by pressing and holding specific buttons.
Test cycle: Run quick wash to ensure proper operation.

CAUTION! Ensure transit bolts are removed before first use to prevent damage.

Specifications

Model: Beko WTK72041W
Capacity: 7kg
Spin Speed: 1200 RPM
Energy Rating: A+++
Water Pressure: 0.5 - 10 bar
Programs: 15 programs including Cotton, Synthetic, Delicate, Quick Wash, Sport, Wool
Dimensions (HxWxD): 85 x 60 x 45 cm
Power Supply: 220-240V, 50Hz
Noise Level: Wash: 56 dB, Spin: 76 dB
Weight: 62 kg

Controls and Settings

Access settings via control panel buttons and rotary selector.

Control Panel: Power Button, Program Selector, Start/Pause, Delay Timer, Speed Selection, Temperature Selection, Extra Rinse, Child Lock.

Programs: Select via rotary dial (Cotton, Synthetic, Quick 30', Delicate, Wool, Sport, etc.). Temperature: 20°C to 90°C options. Spin Speed: 400 to 1200 RPM or no spin. Options: Extra rinse, pre-wash, intensive wash. Settings: Water hardness, buzzer volume, factory reset.

Connecting Water Supply

Cold water connection standard; hot water optional if model supports.

Turn off water supply before connecting hoses.
Connect inlet hose to water tap; hand-tighten, then use wrench for quarter turn.
Ensure drain hose is not kinked and placed at correct height (60-100 cm).
Check for leaks by turning on water briefly before starting machine.

Tip: Use only provided hoses; do not use old or damaged hoses.

Using Wash Programs

Select appropriate program for fabric type.

Load laundry: Open lid, distribute clothes evenly, do not overload.
Add detergent: Pour into detergent drawer (main wash and pre-wash compartments).
Select program: Turn dial to desired program (e.g., Cotton for cotton fabrics).
Adjust options: Set temperature, spin speed, extra rinse if needed.
Start: Press Start/Pause; display shows time remaining.
Pause/change: Press Start/Pause to pause; to change, turn off and restart.
End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not open lid during spin cycle. Wait until drum stops completely.

Special Features

Delay Timer: Set start time up to 24 hours in advance. Child Lock: Press and hold specific buttons to lock controls. AquaWave Technology: Provides wave-like motion for thorough cleaning. Quick Wash: 30-minute program for lightly soiled loads. Imbalance Control: Automatically redistributes load if uneven.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean detergent drawer: Remove monthly, rinse under warm water.
Clean drum: Run empty hot wash with washing machine cleaner monthly.
Check filter: Clean drain pump filter every 3 months to remove debris.
Wipe exterior: Use damp cloth; do not use abrasive cleaners.

CAUTION! Unplug machine before cleaning any parts. Do not use high-pressure water.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label class A+++. Manufactured by Beko PLC. For support, visit www.beko.com or contact customer service at 0333 207 9710 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/Lid	Check plug is in; ensure lid is closed properly; press Start/Pause.
No water intake	Taps/hoses/filter	Ensure water taps are on; check hoses for kinks; clean inlet filter.
Water doesn't drain	Drain hose/filter	Check drain hose is not kinked or too low; clean pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; check machine is level; redistribute load.
Error codes on display	Various faults	Refer to manual error code list (e.g., E01: Water inlet fault).
Clothes too wet after spin	Overload/speed	Reduce load size; select higher spin speed; ensure drain hose is clear.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.com