Beko WTK74011W Washing Machine Manual

The Beko WTK74011W is a 7kg capacity front-loading washing machine featuring A+++ energy efficiency, 1400 RPM spin speed, various wash programs (Cotton, Synthetic, Delicates, Wool, Quick Wash), delay timer, child lock, and anti-crease function. It includes automatic load detection, foam detection, and imbalance control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent drawer, Water inlet valves, Drain pump filter, Adjustable feet.

FeatureDescription
Capacity7kg (dry laundry weight)
Energy RatingA+++ (most efficient)
Spin SpeedUp to 1400 RPM
ProgramsCotton, Synthetic, Delicates, Wool, Quick Wash, etc.
Delay TimerUp to 24 hours
Child LockLocks control panel during operation
Anti-CreaseReduces wrinkles after washing
Load DetectionAutomatically adjusts water and energy
Foam DetectionPrevents excessive suds
Imbalance ControlReduces vibration during spin

Installation

Unpack and inspect contents. Place on level, solid floor.

  1. Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
  2. Adjust feet: Turn feet to level machine; use spirit level.
  3. Connect water inlet: Attach hoses to hot/cold taps (if applicable); use supplied hoses.
  4. Connect drain hose: Place in standpipe or sink; secure with hook if provided.
  5. Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use.

First-Time Setup

Plug in machine; follow initial steps.

  1. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
  2. Set water hardness: In settings menu, adjust based on local water (if available).
  3. Detergent drawer: Fill compartments I (pre-wash), II (main wash), * (softener).
  4. Select program: Turn dial to desired program; press Start/Pause.

CAUTION! Ensure machine is level to prevent excessive vibration.

Specifications

Controls and Settings

Control Panel: Program dial, Start/Pause button, Option buttons (Delay, Speed, Temp, etc.), Display.

Program Dial: Select wash program. Start/Pause: Start or pause cycle. Option Buttons: Adjust spin speed, temperature, delay time, extra rinse, etc. Display: Shows time remaining, settings, error codes.

Settings: Child Lock (press and hold for 3 sec), Anti-Crease (activates after wash), Load Detection (auto).

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual). Drain: Place hose in standpipe (max height 100cm).

  1. Turn off taps before connecting hoses.
  2. Check hose seals; tighten by hand, then quarter-turn with pliers.
  3. Ensure drain hose is not kinked or submerged.
  4. After connection, open taps fully and check for leaks.

Tip: Use only supplied hoses; replace if damaged.

Using Wash Programs

Supports various fabrics and soil levels.

  1. Sort laundry: By color and fabric type.
  2. Load machine: Do not overload; leave space at top.
  3. Add detergent: Use drawer compartments; follow dosage instructions.
  4. Select program: Turn dial (e.g., Cotton for towels/bedding).
  5. Adjust options: Press Temp, Speed, etc. to customize.
  6. Start: Press Start/Pause; door locks automatically.
  7. After wash: Remove laundry promptly; leave door ajar to dry.

WARNING! Do not open door during wash; wait until unlock symbol appears.

Special Functions

Delay Timer: Press Delay button to set start time (up to 24h). Child Lock: Press and hold for 3 sec to lock controls. Anti-Crease: Reduces wrinkles by tumbling after wash. Extra Rinse: Adds rinse cycle for sensitive skin.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run drum clean program every 30 washes.

CAUTION! Do not use abrasive cleaners; clean filter periodically to prevent blockages.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Manufactured by Beko PLC. For support, visit www.beko.com or contact local service center. Energy label according to EU regulation 2019/2014.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startDoor not closed/powerClose door firmly; check plug and power outlet; ensure child lock is off.
No water intakeTaps closed/hose kinkedOpen taps; check hose for kinks; clean inlet filter.
Excessive vibrationTransit bolts/levelingEnsure transit bolts removed; adjust feet to level machine; redistribute load.
Water not drainingDrain hose/filter blockedCheck hose for kinks; clean pump filter; ensure standpipe height correct.
Error code on displayVarious faultsConsult manual for code meaning (e.g., E01: water inlet fault); reset by unplugging.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com.

Beko WTK74011W Washing Machine Manual © - All Rights Reserved 2025