beko wtk82011w washing machine manual

The Beko WTK82011W is a freestanding washing machine with a capacity of 8 kg, featuring an A+++ energy rating, 1400 rpm spin speed, and multiple wash programs. It includes features such as Anti-Crease, Quick Wash, Drum Clean, and Delay Timer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with rotary program selector, LED display, detergent drawer, drum, filter, and adjustable feet.

Feature	Description
Capacity	8 kg (dry laundry)
Energy Rating	A+++ (most efficient)
Spin Speed	Up to 1400 rpm
Programs	Cotton, Synthetic, Quick Wash, Delicate, Wool, Drum Clean, etc.
Anti-Crease	Reduces wrinkles at end of cycle
Delay Timer	Delay start up to 24 hours
Child Lock	Prevents accidental program changes
Noise Level	Wash: 53 dB; Spin: 75 dB
Dimensions (HxWxD)	85 x 60 x 60 cm
Weight	Approx. 68 kg

Installation

Unpack and inspect contents. Place on a level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level.
Connect water inlet: Attach inlet hose to cold water tap (3/4” thread).
Connect drain hose: Place in standpipe or sink (max height 100 cm).
Plug into grounded power outlet.

WARNING! Do not install in areas below 0°C. Ensure transit bolts are removed before use.

First-Time Setup

Before first wash, run a drum clean cycle.

Plug in and turn on machine.
Add detergent: Pour 100 ml of liquid detergent into drawer compartment II.
Select program: Turn selector to "Drum Clean".
Start: Press Start/Pause. Let cycle complete (approx. 70 minutes).
Set language: If display allows, set to ENGLISH via settings.

CAUTION! Ensure machine is level to prevent excessive vibration.

Specifications

Model: Beko WTK82011W
Type: Freestanding Front Load Washer
Capacity: 8 kg
Energy Class: A+++
Annual Energy Consumption: 150 kWh
Water Consumption: 52 litres per cycle (cotton 60°C)
Spin Speed: 1400 rpm
Noise: Wash 53 dB; Spin 75 dB
Programs: 15 programs including Cotton, Eco 40-60, Quick Wash, Delicate
Power Supply: 220-240 V, 50 Hz
Max Load: 2300 W

Controls and Settings

Control Panel: Rotary program selector, LED display, Start/Pause, Delay, Speed, Temperature, Option buttons.

Program Selector: Turn to choose program (Cotton, Synthetic, Quick 30', Wool, etc.). Options: Delay (1-24h), Spin Speed (400-1400 rpm, Rinse Hold), Temperature (Cold, 20°C, 30°C, 40°C, 60°C, 90°C). Display: Shows time remaining, cycle stage, error codes. Child Lock: Press and hold Delay + Speed for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Cold fill only. Drain: Hose can be placed in standpipe or sink.

Ensure water tap is off before connecting hose.
Attach inlet hose to machine first, then to tap.
Check for leaks; turn tap on fully.
Place drain hose securely; avoid kinks.
Test by running a quick rinse cycle.

Tip: Use hose clips if provided. Do not extend drain hose beyond 1.5 m.

Using Wash Programs

Select program based on fabric type and soiling.

Load laundry: Do not exceed 8 kg; distribute evenly.
Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
Select program: Turn selector (e.g., Cotton for normal loads).
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press Start/Pause. Display shows time remaining.
Pause/change: Press Start/Pause to pause; turn selector to change program (if allowed).
End of cycle: Signal sounds; door unlocks after a few minutes.

WARNING! Do not open door during spin. Remove items promptly to avoid creasing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Detergent Drawer: Pull out and clean monthly under running water.
Drum: Run Drum Clean program monthly (without laundry).
Filter: Clean every 2-3 months: turn off machine, open filter cover at front, drain water, remove debris.
Door Seal: Wipe clean after each use; check for objects.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning filter. Do not use harsh chemicals.

Regulatory Information

CE marked. Complies with EU directives for low voltage, EMC, and eco-design. Manufacturer: Beko PLC. For EU declarations of conformity, visit www.beko.com. Waste disposal: Dispose of packaging and old appliance according to local regulations. For support, contact Beko customer service or visit www.beko.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Door not closed/power	Close door firmly; check plug and power; ensure child lock is off.
No water intake	Tap off/hose kinked	Open tap fully; straighten hose; check filter in inlet valve.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Water not draining	Drain hose blocked/filter	Check hose for kinks; clean pump filter.
Error code on display	Various faults	Consult manual error code list (e.g., E01: door issue; E02: drain problem).
Poor wash results	Overload/wrong detergent	Reduce load; use correct detergent amount; select appropriate program.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center. Do not attempt repairs yourself.