Beko WTL82051W Instruction Manual

The Beko WTL82051W is a freestanding washing machine with a capacity of 8kg, featuring multiple wash programs, energy efficiency, and user-friendly controls. It includes safety features, installation guidelines, and maintenance instructions. Below are key sections for safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel, detergent drawer, drum, water inlet valves, drain pump, and adjustable feet.

Feature	Description
Capacity	8 kg (dry laundry)
Energy Class	A+++ (high efficiency)
Spin Speed	Up to 1200 rpm
Programs	Cotton, Synthetics, Delicates, Quick Wash, etc.
Display	LED with time remaining and cycle indicators
Delay Start	Up to 24 hours
Child Lock	Prevents accidental program changes
Door Lock	Automatic during operation
Water Inlet	Cold and hot water connections
Dimensions (HxWxD)	85 x 60 x 55 cm

Installation

Unpack and inspect contents. Place on a level, stable floor.

Remove transit bolts: Use spanner to remove bolts at rear; keep for future moves.
Adjust feet: Turn feet to level machine; use spirit level to check.
Connect water supply: Attach hoses to cold and/or hot water taps; ensure tight connections.
Connect drain hose: Place hose into standpipe or sink; secure with hook if provided.
Plug into grounded power outlet.

WARNING! Do not install in wet areas. Ensure transit bolts are removed before use to prevent damage.

First-Time Setup

Before first wash, run a maintenance cycle.

Power on machine: Press POWER button.
Select maintenance cycle: Choose "Drum Clean" or run a 90°C cotton cycle without laundry.
Add detergent: Use a small amount of detergent in the main wash compartment.
Start cycle: Press START/PAUSE.
Set preferences: Adjust default settings like spin speed or temperature via PROGRAMME button.

CAUTION! Ensure water supply is connected and drain hose is properly positioned.

Specifications

Model: WTL82051W
Capacity: 8 kg
Energy Rating: A+++
Water Consumption: Approx. 52 liters per cycle (cotton, 60°C)
Spin Speed: 1200 rpm (adjustable)
Noise Level: Wash: 56 dB; Spin: 76 dB
Programs: 15 programs including Cotton, Eco, Synthetic, Delicate, Quick Wash
Power Supply: 230V~50Hz
Weight: 68 kg
Warranty: 2 years standard

Controls and Settings

Control Panel: POWER, PROGRAMME selector, START/PAUSE, OPTIONS (spin speed, temperature, delay), CHILD LOCK.

Detergent Drawer: Compartment I (pre-wash), II (main wash), * (fabric softener).

Program Selection: Turn PROGRAMME knob to desired cycle (e.g., Cotton, Synthetic). Options: Adjust spin speed (400-1200 rpm), temperature (cold to 90°C), delay start (1-24h). Child Lock: Press and hold CHILD LOCK for 3 seconds to activate/deactivate.

Connecting Water Supply

Connect to cold water tap (mandatory) and hot water tap (optional).

Ensure taps are off and machine is unplugged.
Attach inlet hoses: Screw onto taps; use washers provided.
Connect to machine: Attach hoses to corresponding inlet valves (blue for cold, red for hot).
Turn on taps slowly; check for leaks.
Run a quick test cycle to confirm water flow.

Tip: Use only provided hoses; do not overtighten.

Using Wash Programs

Select program based on fabric type and soil level.

Load laundry: Do not exceed 8 kg; distribute evenly.
Add detergent: Use compartment II for main wash; follow dosage instructions.
Select program: Turn PROGRAMME knob (e.g., Cotton for normal loads).
Adjust options: Set temperature, spin speed, delay if needed.
Start: Press START/PAUSE; door locks automatically.
Pause/stop: Press START/PAUSE to pause; turn PROGRAMME knob to cancel.
End of cycle: Machine beeps; door unlocks after a short delay.

WARNING! Do not open door during wash or spin; wait for unlock indicator.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Detergent drawer: Pull out; rinse under warm water monthly.
Drum: Run "Drum Clean" cycle monthly or use washing machine cleaner.
Filter: Clean drain pump filter every 3 months: turn off machine, open filter cover, drain water, remove debris.
Inlet filters: Check annually; clean if water flow is slow.

CAUTION! Unplug before cleaning. Do not use steam or high-pressure cleaners.

Regulatory Information

CE Marking: Complies with EU directives. Waste Electrical and Electronic Equipment (WEEE): Do not dispose with household waste; recycle appropriately. Manufacturer: Beko plc, UK. For support, visit www.beko.co.uk or contact 0333 207 9710.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't start	Power/door	Check plug and power; ensure door is closed properly.
No water intake	Taps/hoses/filters	Ensure taps are on; check hoses for kinks; clean inlet filters.
Water not draining	Drain hose/filter	Check hose for blockages; clean drain pump filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Unusual noise	Foreign objects	Check drum for coins, buttons; remove if found.
Error codes (e.g., E01)	Various faults	Refer to manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes, then restart.

Service: 0333 207 9710; www.beko.co.uk