Beko WTL84121W User Manual

The Beko WTL84121W is an 8 kg capacity front-loading washing machine with 1200 RPM spin speed, featuring A+++ energy rating, ProSmart Inverter Motor, Anti-Allergy program, Quick Wash, SteamCure, and Delay Timer functions. It includes various wash programs for different fabric types, child lock, self-cleaning program, and electronic controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Electronic control panel, ProSmart Inverter Motor, Detergent drawer, Water inlet valves, Drain pump filter.

Feature	Description
Capacity	8 kg (dry laundry weight)
Spin Speed	1200 RPM maximum
Energy Rating	A+++ (most efficient)
Motor	ProSmart Inverter Motor (10-year warranty)
Anti-Allergy Program	Eliminates 99.9% of allergens
Quick Wash	14-minute program for lightly soiled items
SteamCure	Reduces wrinkles and odors
Delay Timer	Up to 24 hours delay start
Child Lock	Prevents accidental program changes
Self-Cleaning	Automatic drum cleaning program

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
Connect drain hose: Place in standpipe or sink; secure to prevent slipping.
Level the machine: Adjust feet to ensure machine is stable and does not vibrate.
Plug into grounded power outlet.

WARNING! Machine is heavy; lift with care to avoid injury. Ensure transit bolts are removed before first use.

First-Time Setup

Power on machine; follow initial setup procedure.

Run initial wash: Select Cotton 90°C program without laundry to clean drum.
Set language: Press and hold Start/Pause for 3 seconds to cycle through languages.
Adjust default settings: Use Settings button to set beep volume, end signal, etc.
Load detergent: Fill compartments in detergent drawer as per instructions.

CAUTION! Ensure machine is level; improper leveling causes excessive vibration and noise.

Specifications

Model: WTL84121W
Capacity: 8 kg
Spin Speed: 1200 RPM
Energy Class: A+++
Water Consumption: Approx. 52 liters per cycle (Cotton 60°C)
Noise Level: Washing: 56 dB; Spinning: 76 dB
Dimensions (HxWxD): 84 x 59.5 x 54 cm
Weight: 68 kg
Power Supply: 230-240V, 50Hz
Programs: Cotton, Synthetic, Delicate, Wool, Quick Wash, Anti-Allergy, SteamCure, etc.

Controls and Settings

Access functions via control panel. Display: Shows program time, remaining time, settings.

Buttons: Power On/Off, Program Selection, Temperature, Spin Speed, SteamCure, Delay Start, Start/Pause, Settings.

Program Selection: Rotate knob to choose program (Cotton, Synthetic, Delicate, etc.). Temperature: Adjust from cold to 90°C. Spin Speed: Adjust from No Spin to 1200 RPM. SteamCure: Activates steam function for selected programs. Delay Start: Set delay up to 24 hours. Settings: Adjust beep volume, child lock, self-clean reminder.

Connecting Water Supply

Water inlet: Hot and cold connections (if machine supports hot fill). Drain: Hose to standpipe or sink.

Turn off taps before connecting hoses.
Connect inlet hoses to taps and machine (red for hot, blue for cold).
Secure drain hose in standpipe (max height 100 cm) or over sink edge.
Open taps fully and check for leaks.

Tip: Use new hoses; do not reuse old hoses to prevent leaks.

Using Wash Programs

Supports various programs for different fabrics.

Load laundry: Open door, load items loosely, close door securely.
Add detergent: Pull drawer, add detergent to main wash compartment, softener to conditioner compartment.
Select program: Turn knob to desired program (e.g., Cotton for cottons).
Adjust settings: Set temperature, spin speed, SteamCure if needed.
Start: Press Start/Pause; machine will begin cycle.
After wash: Remove laundry promptly; leave door ajar to dry drum.

WARNING! Do not overload; balance load to prevent vibration. Remove coins, keys from pockets.

Special Functions

Anti-Allergy: Uses higher temperature and extra rinses to eliminate allergens. Quick Wash: 14-minute cycle for lightly soiled items. SteamCure: Reduces wrinkles by 30%, refreshes clothes. Delay Start: Delays start up to 24 hours. Child Lock: Press and hold Settings + Start/Pause for 3 seconds to activate.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent drawer monthly; run Self-Clean program every 40 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not start	Power/child lock	Check power outlet; ensure plug is in; deactivate child lock.
No water intake	Taps/hoses	Ensure taps are open; check hoses for kinks; clean inlet filter.
Excessive vibration	Transit bolts/leveling	Ensure transit bolts removed; adjust feet to level machine.
Water does not drain	Drain hose/filter	Check drain hose for blockages; clean pump filter.
Door won't open	Water/door lock	Wait until water drained; unplug for 2 minutes to reset.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service center; www.beko.com