Instruction Manual for Beko Washing Machine

The Beko Washing Machine is a high-efficiency front-loading appliance designed for home use, featuring multiple wash programs, energy-saving modes, child lock, delay start, spin speed adjustment, and self-cleaning functions. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump, Door Lock, and Adjustable Feet.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove transit bolts: Use wrench to remove all transit bolts from rear.
2. Adjust feet: Level machine using adjustable feet; ensure no rocking.
3. Connect water supply: Attach hoses to hot/cold water taps (if applicable).
4. Connect drain hose: Place hose in standpipe or sink; secure properly.
5. Plug into grounded electrical outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure transit bolts are removed before first use.

First-Time Setup

Plug in machine; follow initial setup procedure.

1. Run empty wash: Select Cotton program at 90°C without laundry to clean drum.
2. Set language: Use settings button to select preferred language.
3. Test functions: Run quick test cycle to ensure proper operation.
4. Load detergent: Fill compartments with appropriate detergent.

CAUTION! Ensure water connections are tight to prevent leaks. Check drain hose is not kinked.

Specifications

• Capacity: 8 kg (dry weight).
• Energy Rating: A+++.
• Spin Speed: Up to 1400 RPM.
• Water Pressure: 0.5 - 10 bar.
• Programs: 15+ including Eco, Quick, Delicate.
• Dimensions: 85cm H x 60cm W x 55cm D.
• Power Supply: 220-240V, 50Hz.
• Noise Level: 72 dB (wash), 76 dB (spin).
• Weight: 68 kg.

Controls and Settings

Access programs via rotary dial and function buttons. Display shows time, temperature, spin speed.

Control Panel: POWER, Start/Pause, Program Dial, Temperature, Spin Speed, Delay Start, Extra Rinse, Child Lock.

Programs: Cotton (40°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Quick Wash (15-30 min), Wool, Sport, Eco 40-60. Settings: Temperature selection, Spin speed adjustment (400-1400 RPM), Delay start (1-24 hrs), Pre-wash option, Extra rinse.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue=cold, red=hot). Drain: Place hose in standpipe (max height 1m).

1. Turn off water taps before connecting hoses.
2. Use only supplied hoses; do not reuse old ones.
3. Ensure drain hose is not submerged in water.
4. Check for leaks after first connection.

Tip: Install drain hose with proper loop to prevent siphoning.

Using Wash Programs

Supports various fabrics and soil levels.

1. Sort laundry: Separate by color and fabric type.
2. Load machine: Do not overload; leave space for movement.
3. Add detergent: Use correct compartment (I=pre-wash, II=main wash, *=softener).
4. Select program: Turn dial to desired program.
5. Adjust settings: Set temperature, spin speed, extra options.
6. Start: Press Start/Pause button.
7. After wash: Remove laundry promptly; leave door ajar to dry.

WARNING! Do not wash items contaminated with flammable substances. Check pockets for objects.

Special Functions

Delay Start: Set 1-24 hour delay. Child Lock: Press and hold buttons for 3 seconds. Extra Rinse: Adds additional rinse cycle. Pre-wash: For heavily soiled items. Quick Wash: 15-30 minute cycle for small loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent drawer monthly. Run self-clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners. Clean drain pump filter regularly to prevent blockages.

Regulatory Information

CE marked; complies with EU directives. Energy label according to EU regulation. For support, visit www.beko.com or contact local service center. Serial number located on door frame. Keep for warranty claims.

Troubleshooting

Reset: Unplug for 5 minutes then restart.

Service: Contact authorized Beko service center; www.beko.com