Manual for Beko Tumble Dryer

The Beko Tumble Dryer is a reliable and energy-efficient appliance designed for home use, featuring multiple drying programs, heat settings, a condenser system, and safety features like child lock and anti-crease function. It operates on standard household power and includes a lint filter, drum light, and end-of-cycle signal. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Drum, Control Panel, Lint Filter, Condenser Unit, Power Cord, Door with safety lock.

Feature	Description
Drum Capacity	Large capacity for family-sized loads
Control Panel	Digital display with program selection
Lint Filter	Removable filter for easy cleaning
Condenser System	No external venting required
Power Cord	Standard plug for household outlet
Door Lock	Safety lock during operation
Anti-Crease	Reduces wrinkles after cycle
Child Lock	Prevents accidental program changes
Drum Light	Illuminates interior for loading/unloading
End Signal	Audible alert when cycle completes

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use wrench to remove bolts from rear panel.
Position dryer: Ensure at least 5 cm clearance on all sides for ventilation.
Check power outlet: Use dedicated 230V AC, 50Hz outlet with proper grounding.
Install lint filter: Insert into slot at front of dryer.

WARNING! Dryer is heavy; lift with care using two people. Never install near heat sources or in wet areas.

First-Time Setup

Plug in dryer; follow initial setup steps.

Select language: Press SETTINGS button, choose language (default ENGLISH).
Set clock: Use +/- buttons to adjust time on display.
Test run: Run empty on COTTONS program to remove manufacturing residues.
Load laundry: Do not exceed maximum load capacity indicated in manual.

CAUTION! Ensure dryer is level to prevent vibration. Check lint filter is clean before first use.

Specifications

Capacity: 8 kg (dry weight).
Energy Class: A++ (EU standard).
Programs: Cottons, Synthetics, Delicates, Quick Dry, Anti-Crease.
Heat Settings: High, Low, Cool Air.
Power: 230V AC, 50Hz, 2400W max.
Dimensions (HxWxD): 85 x 60 x 60 cm.
Condenser Type: Self-contained water collection tank.
Noise Level: ≤ 65 dB during operation.
Weight: 45 kg.

Controls and Settings

Access programs via rotary dial and digital buttons. Display shows time, program, and options.

Buttons: POWER, START/PAUSE, PROGRAM SELECT, OPTIONS (Child Lock, Anti-Crease, Timer), +/- for adjustments.

Programs: Cottons (high heat), Synthetics (medium heat), Delicates (low heat), Quick Dry (30 min), Anti-Crease (tumble without heat). Settings: Clock, Buzzer volume, Language, Reset to defaults. Options: Child Lock (hold 3 sec to activate), Delay Start (1-24 hrs), End Signal on/off.

Connecting to Power

Use dedicated grounded outlet. Do not use extension cords.

Turn off power at mains before plugging in.
Plug cord firmly into 230V outlet.
Ensure voltage matches label on back of dryer.
Power on at mains; dryer display will light up.

Tip: Have a qualified electrician check wiring if outlet is not properly grounded.

Using Drying Programs

Supports various fabrics and drying needs.

Load laundry: Place items loosely in drum; do not overload.
Select program: Turn dial to desired program (e.g., Cottons).
Set options: Press OPTIONS for Child Lock, Anti-Crease, or Delay Start.
Start: Press START/PAUSE; drying time will display.
Monitor: Display shows remaining time; pause anytime with START/PAUSE.
Unload: When cycle ends, remove laundry immediately to reduce creasing.
Clean filter: Remove and clean lint filter after every cycle.
Empty tank: Remove and empty water collection tank after each use.

WARNING! Do not dry rubber, plastic, or flammable items. Ensure items are suitable for tumble drying.

Safety Features

Child Lock: Prevents program changes during operation. Door Safety Lock: Door locks automatically when drum rotates. Overheat Protection: Automatically shuts off if temperature exceeds safe limit. Anti-Crease: Tumbles without heat at end of cycle to reduce wrinkles.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after every use.

Lint filter: Remove, rinse under tap, dry completely before reinserting.
Condenser unit: Clean every month; remove and rinse with water.
Drum: Wipe with soft cloth; never use abrasive cleaners.
Water tank: Empty after each cycle; clean monthly with mild detergent.

CAUTION! Do not use steam or high-pressure cleaners. Ensure all parts are dry before reassembly.

Regulatory Information

CE marked; complies with EU directives for safety and electromagnetic compatibility. Energy label according to EU Regulation 2019/2014. Copyright © 2025 Beko; trademarks of Beko PLC. For support, visit www.beko.com or contact customer service at 1-800-237-5366.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power/door	Check plug and power; ensure door is fully closed.
No heat	Settings/filter	Select heat program; clean lint filter; check condenser.
Excessive vibration	Installation/load	Ensure dryer is level; redistribute load evenly.
Water tank full	Tank not emptied	Empty water collection tank; reinsert properly.
Error code on display	System fault	Refer to manual for code meaning; unplug for 5 min, then retry.

Reset: Unplug for 5 minutes, then plug back in to reset electronics.

Service: 1-800-237-5366; www.beko.com