User Manual for Beko WTL84151W

The Beko WTL84151W is a 8kg capacity front-loading washing machine featuring ProSmart Inverter Motor technology, Anti-Allergy program, SteamCure function, Quick Wash, and various wash programs for different fabric types. It includes energy-saving modes, child lock, delay start, and a digital display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Programs 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, ProSmart Inverter Motor, Digital Display, Control Panel, Detergent Drawer, Water Inlet Valves, Drain Pump Filter.

FeatureDescription
Capacity8kg (dry laundry weight)
ProSmart Inverter MotorEnergy-efficient, quiet operation with 10-year warranty
Anti-Allergy ProgramEliminates 99.9% of allergens with steam and high-temperature wash
SteamCure FunctionReduces wrinkles and refreshes clothes without washing
Quick Wash14-minute program for lightly soiled items
Digital DisplayShows remaining time, program, and settings
Child LockPrevents accidental program changes
Delay StartProgram start delayed up to 24 hours
Detergent DrawerCompartments for pre-wash, main wash, and softener
Energy ClassA+++ for energy efficiency

Installation

Unpack and inspect contents. Place on stable, level floor.

  1. Remove transit bolts: Use spanner to remove 4 bolts at rear; keep for future moves.
  2. Connect water supply: Attach inlet hoses to hot/cold taps (if applicable) and machine.
  3. Connect drain hose: Place in standpipe or sink; secure to avoid slipping.
  4. Level the machine: Adjust feet to ensure machine is stable; use spirit level.
  5. Plug into grounded power outlet.

WARNING! Do not install in areas with freezing temperatures. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a maintenance wash.

  1. Check installation: Ensure transit bolts removed, machine level, hoses connected.
  2. Open water taps fully.
  3. Run initial wash: Select "Cotton" program at 90°C without laundry; add detergent to drawer.
  4. Set language: If applicable, use settings menu to select language.
  5. Test functions: Run a quick cycle to confirm operation.

CAUTION! Do not use machine without removing transit bolts—risk of damage.

Specifications

Controls and Settings

Access programs via rotary dial and touch buttons. Display shows time, program, and options.

Control Panel: Rotary Dial (select program), Start/Pause, Delay Start, Child Lock, Extra Rinse, Speed/Spin, Temperature.

Programs: Cotton (20°C-90°C), Synthetic (30°C-60°C), Delicate (cold-40°C), Wool (cold-40°C), Quick Wash (14 min), Anti-Allergy (60°C-90°C), SteamCure (20 min), Drum Clean. Settings: Adjust temperature, spin speed, extra rinse, pre-wash. Child Lock: Press and hold Child Lock button for 3 seconds to activate/deactivate.

Connecting Water & Drain

Water Inlet: Connect hoses to taps (blue for cold, red for hot if dual supply). Drain: Place hose in standpipe (max height 100cm) or sink.

  1. Turn off taps before connecting hoses.
  2. Use only supplied hoses; replace if damaged.
  3. Ensure drain hose is not kinked and secured.
  4. Check for leaks after first use.

Tip: Use hose clips for secure connections. Do not extend drain hose beyond 1.5m.

Using Wash Programs

Select program based on fabric type and soil level.

  1. Load laundry: Do not exceed 8kg; distribute evenly.
  2. Add detergent: Use drawer compartments (I: pre-wash, II: main wash, *: softener).
  3. Select program: Turn rotary dial to desired program.
  4. Adjust settings: Use buttons to modify temperature, spin speed, etc.
  5. Start: Press Start/Pause; display shows remaining time.
  6. Pause/change: Press Start/Pause to pause; turn dial to change program (if not locked).
  7. End of cycle: Machine beeps; remove laundry promptly to avoid wrinkles.

WARNING! Do not wash items soaked in solvents; risk of fire. Close door properly before starting.

Special Functions

Anti-Allergy: Uses steam and high temperature to eliminate allergens. SteamCure: Reduces wrinkles without washing (add water to detergent drawer). Quick Wash: 14-minute cycle for lightly soiled items. Delay Start: Set start time up to 24 hours ahead. Child Lock: Locks controls during operation.

Care & Cleaning

Clean detergent drawer monthly: Pull out, rinse under tap. Clean drum: Run "Drum Clean" program monthly without laundry. Clean drain pump filter: Turn off machine, open filter cover at front, drain water, remove debris.

CAUTION! Unplug before cleaning filter. Wipe exterior with damp cloth; no abrasive cleaners.

Regulatory Information

CE marked; complies with EU directives for safety and EMC. Energy label according to EU regulations. Copyright © Beko plc; trademarks of Arçelik A.Ş. For support, visit www.beko.com or contact local service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Machine won't startPower/doorCheck plug, fuse, power; ensure door closed properly.
No water intakeTaps/hoses/filterOpen taps fully; check hoses for kinks; clean inlet filter.
Water doesn't drainDrain hose/filterCheck hose for kinks/blockage; clean pump filter.
Excessive vibration/noiseTransit bolts/levelingEnsure transit bolts removed; re-level machine; redistribute load.
Error codes on displayVarious faultsRefer to manual error code list; unplug for 5 minutes, restart.

Reset: Unplug for 5 minutes, then restart.

Service: Contact authorized Beko service; www.beko.com.

User Manual for Beko WTL84151W © - All Rights Reserved 2025